Electric hammer is a kind of common hardware tool. It is also driven by electricity, which can greatly improve the overall work efficiency and time efficiency. However, electric hammer operation is also a technical activity. The operator also needs to pay attention to some matters when operating the electric hammer. To ensure safety, what should you pay attention to before working on the hammer?
1. Confirm whether the power supply connected to the site matches the nameplate of the electric hammer. Whether there is a leakage protector to ensure safe use.
2. The drill bit and the holder should be adapted and properly installed.
3. When drilling walls, ceilings and floors, first confirm whether there are buried cables or pipes to ensure construction safety.
4. When working in a high place, pay full attention to the following objects and pedestrian safety, and set a warning sign if necessary.
5. Check if the switch on the hammer is cut off. If the power switch is turned on, the power tool will rotate immediately when the plug is plugged into the power socket, which may cause personal injury.
6. If the work site is away from the power supply, when extending the cable, use a sufficient capacity to install a qualified extension cable. Extension cables should be elevated or protected against rolling damage if they pass through a pedestrian aisle.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Snap-Action Thermostat,Snap Action Thermostat,Snap Disk Thermostat,Nest 3Rd Generation Thermostats
LONG TERM ELEC. CO., LTD , https://www.longtermhvac.com