1. The grass-roots level must be clean, smooth, and the cement surface should be calendered, free from sand, and empty.
2. The moisture content of the base layer of the roof shall be within 5%, and the moisture content of the waterproof base layer of the ground and underground buildings shall be within 10%. 13839060840
3. The roof should be installed with an exhaust pipe every 36m2.
4. When the A and B materials are mixed, the B component must be mixed and then mixed with the A component.
Ratio: Part A: B = 1:1 (important ratio) or 1:1.5 according to packaging requirements
During the construction, the A and B materials shall be poured into a bucket. Use a wooden stick or hand-held electric mixer for 3-5 minutes until it is uniform. Use a plastic scraper or a rubber scraper on the base layer. The mixture must be used within 30 minutes.
The product is a two-component waterproof material composed of organic liquid and inorganic powder. It is a kind of waterproof material with high elasticity of organic material and durability of inorganic materials. It forms a high elasticity after painting. Waterproof coating, and can be prepared according to the needs of the color coating.
JS polymer water repellent waterproof coating can be directly applied to wet or dry masonry, mortar, concrete, metal, wood, various insulation layers, various waterproof layers (such as asphalt, rubber, SBS, APP, polyurethane). Various old and new buildings and structures (houses, underground works, tunnels, bridges, ponds, reservoirs, etc.) can be used.
product advantages:
1. Can be directly applied to wet or dry base materials of various materials;
2, the coating is highly resilient and tough, water resistance, weather resistance, durability are excellent;
3, can add pigments to form a simple color coating;
4, non-toxic, harmless, non-polluting, construction, short construction period;
5. No flow in the facade, slope and top surface
6, high temperature 140 °C, especially for roof, bathroom waterproof;
7. It can be firmly bonded to various base materials such as base surface and cement mortar.
I plant more than 30 kinds of products grand investment and technology transfer, welcome to our factory site to visit and learn!
Dalian Dalian JS Polymer Waterproof Coatings Manufacturers Basement Waterproof Coatings Polymer Cement Waterproof Coatings Composite Waterproof Coatings What is js Waterproof Coating JS Waterproof Coating Price js Waterproof Coating Formula JS Waterproof Coating Construction Solution JS Waterproof Coating Thickness
JS polymer cement-based waterproof mortar features:
This product adopts Germany's advanced technology formula, and is made up of modified high-performance synthetic emulsion and inorganic polymer mortar dry powder according to the scientific mixture ratio. Non-toxic, non-hazardous and non-corrosive, it meets the requirements of environmental protection and can be directly used in drinking water pool
Product Usage:
JS-1 polymer cement-based waterproof coating: It is mainly used as waterproofing coating for roofing waterproofing or high stretch performance.
JS-II polymer cement-based waterproof coating: It is mainly used in basement, underground tunnel, bathroom, pool, etc., especially wet and long-term
Construction under conditions of immersion in water.
Technical Parameters
Dalian Dalian JS Polymer Waterproof Coatings Manufacturers Basement Waterproof Coatings Polymer Cement Waterproof Coatings Composite Waterproof Coatings What is js Waterproof Coating JS Waterproof Coating Price js Waterproof Coating Formula JS Waterproof Coating Construction Solution JS Waterproof Coating Thickness
Test item JS-I Type JS-II
Technical indicators Test results Technical indicators Test results
1 Solid content,% ≥65 83 ≥65 82
2 tensile strength, Mpa ≥ 1.2 2.36 ≥ 1.8 2.29
3 elongation at break,% ≥200 241 ≥80 118
4 Water impermeability, 0.3 Mpa, 30min Watertight Qualified Watertight
5 Drying
Time dry time, h ≤ 4 2 ≤ 4 2.5
Actual dry time, h ≤ 8 6.5 ≤ 8 7
6 Low temperature flexibility, 10mm rod -10°C, no cracks qualified - - - -
7 Moisture base surface bond strength, Mpa ≥ 0.5 0.98 ≥ 1.0 1.15
Construction instructions:
1). Base surface treatment: The base surface must be smooth, firm, clean, no clear water, no leakage. Injustice must be leveled first; leakage must be
Plugging treatment must be performed first. It is recommended to use Huaqin 901 fast sealing agent; yin and yang angles should be made into arc angles.
2). Ingredients: Take the material according to the specified proportion, stir it thoroughly with a stirrer for about 5 minutes, until the material does not contain pellets, preferably not
Stir with hand. If you need to add water, add water to the liquid and stir it with a stirrer.
Slowly add powder. Color layer coating pigment addition is less than 0% liquid, and only in the surface coating
Add pigments.
3). Coating: According to the characteristics and requirements of the project, select the appropriate method. Coating should be as uniform as possible and there should be no local deposition.
And require more than a few rolling brush so that there is no air bubbles between the coating and the base layer, bonding tight. In a wet or non-absorbent substrate
When using it, you do not need to use the bottom layer. The time interval between the layers is based on the fact that the previous layer of film was dry and non-stick. If you do
The thickness of the water layer is not enough, especially the facade construction, can add one or several layers. When applying non-woven fabrics, undercoat and
The top coat should be continuously applied, the nonwoven fabric should be laid flat, and the empty brush should be left without a blank brush.
Dalian Dalian JS Polymer Waterproof Coatings Manufacturers Basement Waterproof Coatings Polymer Cement Waterproof Coatings Composite Waterproof Coatings What is js Waterproof Coating JS Waterproof Coating Price js Waterproof Coating Formula JS Waterproof Coating Construction Solution JS Waterproof Coating Thickness
Contact Ma Zhanqiu 15142357817 QQ 786091124
Precautions:
1, can not be below 0 °C or construction in the rain, in a particularly humid and not ventilated environment, will affect the drying and filming.
2. Under the general conditions, the coating can be used for about 3 hours and the coating drying time is about 2-6 hours. The site has a low ambient temperature, high humidity, poor ventilation, and a long dry time, and vice versa.
3, the basic color is ivory white. When choosing other colors, add neutral, inorganic pigments, iron oxide series pigments are recommended.
Other pigments must first be tested and confirmed to be free from abnormalities before they can be used.
4. It must be done 2 days after the waterproof layer is completed. The mortar is for ease of construction and can be applied after the last coat of the waterproof layer.
Sprinkle clean grit.
Packaging, storage and transportation:
1. Engineering packaging: JS-1 type JS-I glue solution: 10kg/barrel
JS-I powder: 25kg/bag
JS-11 type JS-II glue solution: 10kg/barrel
JS-II powder: 25kg/bag
2, stored in a cool place above 5 °C, storage period of 12 months, the product is non-toxic, odorless, non-polluting, according to the general cargo transport
lose.
Project performance:
Beijing University of Sport University Swimming Hall, Ditan Tower, Wastewater Treatment Station, Watershed Tunnel, Tsinghua Science Park, North China Electric Power University, Gome First City, National Swimming Center, Mudanjiang City Government, Qiaobo Skiing Center, etc.
Dalian Dalian JS Polymer Waterproof Coatings Manufacturers Basement Waterproof Coatings Polymer Cement Waterproof Coatings Composite Waterproof Coatings What is js Waterproof Coating JS Waterproof Coating Price js Waterproof Coating Formula JS Waterproof Coating Construction Solution JS Waterproof Coating Thickness
Basement in the bathroom paint cement housing toilet waterproof toilet waterproof material bathroom waterproof price
Piston rings are manufactured and classified on the basis of function and usability. The primary usage of the Piston Ring is to seal the chamber (where the piston is moving), which can be a combustion chamber of a 2 stroke or a 4 stroke engine. Marine engines have three or more types of rings fitted on the circumference of the piston.
The piston ring is an essential piston part, and its numbers and functionality differ depending on the type and capacity of the engine.
In 2-stroke large engines, compression type piston rings are used to seal the combustion chamber and wiper rings are installed below them to wipe the deposits from the liner and distribute oil on the liner surface.
Auto Parts Piston and Ring,Aluminum Alloy Piston Set,Piston Engine Parts Parts,Piston Piston Ring Used for Car
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearings.com