After confirming that the crop is lacking in the trace elements, it is necessary to supplement it by fertilization. The application of micro-fertilizer is different from the application of a large number of elements. The demand for micro-fertilizer is very small, and the concentration range that can be adapted is very narrow. If it is missing, it will be poisoned. It is well known that the supplement of a large number of elemental fertilizers is mainly through the application of NPK fertilizers (generally calculated in kilograms) to supply root nutrients; while the shortage of medium and trace elements in crops is not only the case of particularly serious deficiency, but generally You can use the method of root dressing. The advantage of this foliar fertilization is that it directly supplies the above-ground nutrients, and the utilization speed is fast, so that the effective nutrients of the fertilizer are prevented from being fixed and degraded in the soil. Foliar fertilization has higher nutrient use efficiency than soil fertilization, and can directly and effectively solve trace element deficiency. Its shortcoming is: the fertilizer effect is limited for a short time, it is a kind of auxiliary fertilization. Sometimes, for soils that are seriously lacking in certain medium and trace elements, it is necessary to rely on soil fertilization to have obvious effects.
The mechanism of the effect of the micro-element fertilizer on the surface of the leaves is that the fruit tree is tall and has the characteristics of perennial and strong planting. Most of the orchards are distributed on the fertile soil such as beaches and sloping fields. In the management of orchard, the “three elements of fertilizer†of NPK are often supplied through a large amount of soil fertilization, but the medium and trace elements consumed for many years are not corresponding. Return and supplement; in recent years, the area of ​​orchard has expanded rapidly, and the application of organic fertilizer has not kept up, which has also aggravated the contradiction between the shortage of medium and trace elements. In particular, the promotion of high-yielding tree species and the introduction of exotic tree species have a high demand for medium and trace elements, which have aggravated the increase in the demand for medium and trace elements in fruit trees and the urgency of fertilization. From the analysis of the nutritional characteristics of fruit trees, the micro-fertilizer applied by the soil is long from the roots of the fruit trees to the leaves, and it is more difficult to transport and redistribute over long distances. In addition, the demand for trace elements in fruit trees is small. If the method of soil application is adopted, the amount of fertilizer applied is small, the application is uneven, the cost is high, and the utilization rate is low. Therefore, foliar spray is an effective method to correct the deficiency of trace elements in fruit trees.
In order to achieve the desired effect of fruit tree spray fertilizer, the following technical essentials are required:
The choice of fertilizer. Mainly to supply the lack of medium and trace element fertilizers. Do not choose the so-called "Tenquan" large fluid, which is expensive and non-targeted, and the effect is not good. Therefore, it can be based on simple fertilizer. In view of the complexity of the micro-fertilizer market, when individual farmers purchase micro-fertilizers, they must choose a brand to buy good goods, and second, they must jointly purchase groups.
The concentration is appropriate. If the concentration is too low, the effect will not be achieved. If it is too high, it will cause fertilizer damage. The optimum concentration will vary depending on the target crop, growth period and element type.
The number of sprays. Fruit tree spray fertilizer usually takes 2 shots to be effective. In case of special problems such as disasters or obvious symptoms, spray 3~5 times.
Spraying site. The positive and the back of the leaves, stems and young fruits can be sprayed, but the spraying of flowers and buds should pay special attention to the concentration. Because the number of stomata on the back of the leaves is more than the front, the absorption will be more.
Spray time. Avoid wind, rain and noon time. It is advisable to go before 10 o'clock in the morning and after 4 o'clock in the evening.
(Senior Consultant of Sinofert, Professor of China Agricultural University, Cao Yiping)
Zinc Selenide Plano-concave Lenses
Zinc Selenide Plano-concave Lenses,plano concave lens ,plano concave lenses , plano concave lens ray diagram
Our company can produce many kinds of flat convex Spherical Mirrors with different sizes, radii and base materials, flat convex spherical Mirrors, flat concave spherical mirrors, double convex spherical mirrors, double concave spherical mirrors, meniscus spherical mirrors and other ordinary spherical mirrors. Special spherical mirror can also be processed, such as: achromatic spherical mirror, aspheric surface and spherical mirror group.
Materials: optical glasses such as flint glass, ultraviolet fused quartz and infrared fused quartz, as well as optical crystal materials such as calcium fluoride (CaF2), germanium (Ge), Zinc selenide (ZnSe) and silicon (Si)
Focal length: ±5mm -- ±1000mm±1%
(Germany TIROPTICS OPTOMATIC2000 test)
Outer circle: 4mm -- 200mm±0.1mm
Center thickness tolerance: ±0.1mm
Center deviation: 3-5 points
Surface accuracy: /2@
Surface quality: 40/20
Effective diameter: 90%
Plating film: according to customer requirements can be coated
In addition, we have more than a thousand kinds of standard products, and some of the standard products in stock to meet your needs
Zinc Selenide Plano-Concave Lenses,Znse Plano-Concave Lenses,Znse Beamsplitter,Znse Cylindrical Lenses
Gold Dragon Optics Electronic Technology CO.,Ltd , https://www.golddragon-optics.com