Stairs are often seen by us. Shopping malls, hospitals, enterprises and other buildings are all installed by stairs. Now people's living standards have improved, so the requirements for the residences are high. For the second-floor buildings, we often meet with them. to, so I have to install the staircase, then the wooden staircase handrail installation considerations that what? wooden staircase handrail that maintenance methods are there? Xiao Bian below the decoration of the home network come to tell you about it.
First, the stairs wood handrail installation precautions
1. When the stair handrail adopts the whole elbow, the full-scale model should be made before the production, and the blank is drawn on the elbow material to make the blank (the blank size is generally larger than the actual size by about 10mm). When the elbow is bonded, the operating environment temperature must not be lower than 0 °C. The groove under the elbow should be tightly combined with the railing flat iron, and should not be loosened. The wood screw should be drilled and then screwed in. It must not be directly driven by a hammer.
2. According to the slope of the top surface of the slab or railing, match the starting elbow, the general wooden handrail, the elbow can be cut with the handrail material, and the seam is bonded by the cutting angle, which is less considered in the cutting section of the broken block. The three screws are fixedly connected to the support fixing member. When the armrest joints with a section larger than 70 mm are prepared, in addition to the bonding, they should be shackled or ironed underneath.
3. First make a large sample of the large sample, and check with the on-site line, and draw a sample on the elbow material to make the young wool (the wool size is generally larger than the design size of about 10mm). Pre-assembled according to the position of the line, and the end of the longitudinal straight armrest is bonded, and the groove is made below the elbow, and is tightly combined with the railing flat steel or the fixing member.
Second, the stairs wood handrail maintenance method
1. The wet wooden stairs are prone to insect problems. Generally, the upper layer of anti-mite paint should be applied first when installing the wooden staircase. If you find that there are insect eyes on the stairs, you can use the camphor or pepper to grind it into powder, sprinkle it near the insect eye, or choose a professional insecticide, so as to avoid the stairs being more effectively prevented. Also pay attention to the ventilation and drying of the room. In the wet days or during the breeding season, spray some insecticide on the stairs or place mothballs in the corners of the stairs.
2. The moisture protection of the stair maintenance is very important. If the moisture-proof work is not done, the wooden components of the stairs will be deformed, cracked, and peeled off. A layer of cured wear-resistant paint can be applied to the treads, handrails, etc. to reduce the degree of local wear and reduce the degree of moisture. Do not scrub with a large amount of water in the daily cleaning stairs. It is recommended to clean it once a week. Just use a clean broom to clean the surface dust interface. If there are stains, spray it on the surface with a cleaning agent and then scrub with a soft cloth.
3. Metal fittings usually play an important role in the reinforcement of the stairs. If the metal parts are rusted, they must be solved in time. Generally, you can use household white vinegar to wipe with water, but pay attention to the acidity is not too strong, otherwise it will corrode the metal, affect the structure of the metal fittings, and at the same time do the moisture-proof measures of the steel-wood staircase.
The stairs are the connecting body of the house. The stairs are connected to the upper and lower floors, but the types of stairs are also very numerous. Then, what are the precautions and maintenance methods for the wooden handrails of the stairs? I think everyone has read the introduction of the above small series. I understand that, if you still want to know more about decoration, please continue to pay attention to the decoration home Internet cafe.
Undermount sinks are sinks installed under the surface of a worktop with a cut out made to the size of the bowl. It is not common for an undermount sink to come with a draining board but rather the idea is that water can be wiped towards the sink. The kitchen tap is installed separately unlike an inset sink and in the case of granite worktops, has a radial cut out to suit the shape of the sink. They are known as a modern kitchen design and are starting to appear more often.
Undermount Sink,Undermount Kitchen Sink,Stainless Steel Undermount Sink,Black Undermount Sink
Guangdong Huayou Hardware Products Co.,Ltd , https://www.gdhuayouhardware.com