Release valve before the installation of technical requirements

Valve installation and use of technical requirements: 1, the valve chamber before installation should be clean, and clear the defects caused in transit; 2, the valve should be installed to maintain the butterfly valve shaft is horizontal, the piston valve vertically up position; 3 , The valve should be used before commissioning of the transmission to keep the transmission intact, the limit stroke and torque protection control and reliable; 4, the valve drive lubrication before commissioning to fully add lubricants; 5, before starting the electric device , Should carefully read the instructions provided with the electric device.

Fermator Elevator Door Parts

Fermator Elevator Door Parts, Fermator Lift Door Parts

Fermator Group is the largest mono-product manufacturer of automatic doors for lifts in the world. Fermator doors are installed worldwide for light, medium and heavy traffic duty lifts, for domestic use, offices, airports, hotels and public buildings.

Year after year major investment has been made within the Group in order to increase production capacity, improve quality standards and provide the highest level of service to all our customers in more than 90 countries.

With headquarters in Spain and production plants located in France, Italy, Poland, Greece, India, China and Brazil, the Fermator Group responds effectively to the demands of all markets requiring automatic doors for lifts resulting in a major worldwide market share.

The automatic doors manufactured by Fermator comply with International Standards; EN 81-1/2, ASME A17.1-2000, and fire requirements EN 81-58 and UL 10B among numerous others.

Fermator Elevator Door Parts, Fermator Lift Door Parts

CEP Elevator Products ( China ) Co., Ltd. , https://www.china-elevators.com