The General Administration of Quality Supervision, Inspection and Quarantine recently announced the results of the third batch of national product quality random inspections in 2010. The pass rate of wooden furniture (wooden cabinets) products was 84.1%, and the content of hazardous substances detected in some products exceeded the standard.
A total of 270 kinds of wooden furniture produced by 266 enterprises in 15 provinces and municipalities including Beijing, Tianjin, Hebei, Shanghai, Jiangsu, Zhejiang, Anhui, Jiangxi, Shandong, Henan, Hunan, Guangdong, Chongqing, Sichuan, and Shaanxi were inspected. Wooden cabinet) products. According to the requirements of the "Wood Cabinet" QB / T 2530-2001, "Interior Decoration Material Limitation of Hazardous Substances in Wood Furniture" GB18584-2001 standards, the stability of the foot of the wooden furniture (wood cabinet) products, sag, 8 items including material requirements, carpentry requirements, finishing requirements, physical and chemical properties, mechanical properties, and harmful substance limits of paint film coatings were inspected.
Spot checks found that more than forty kinds of products did not meet the requirements of the relevant standards, including 11 batches of formaldehyde emissions, soluble lead, soluble chromium and other harmful substances limit failed. For example, a batch of "Andia" bedside cabinets in Denghuang Furniture Factory in Shifang City failed to pass the formaldehyde emission, soluble lead, and soluble chromium items. A batch of "Bedro" bedside cabinets from Chongqing Bedro Furniture Co., Ltd., a batch of "Senda Boxuan" bedside cabinets from Chengdu Senda Boxuan Furniture Co., Ltd. The batch of "Fuwei Wood" wooden cabinets failed the formaldehyde emission project.
34 kinds of ceramic tile products failed
National supervision and random inspection showed that 34 of the 185 ceramic tile products did not meet the requirements of the relevant standards. It is reported that the water absorption rate is the percentage of the amount of water absorbed by the pores in the ceramic tile product. The lower the water absorption rate, the higher the product strength, the better the wear resistance and gloss performance, and the less prone to cracking or peeling.
The modulus of rupture and the strength of destruction are two main performance indicators for measuring ceramic tiles. Products that fail these two indicators are prone to cracking and breaking during use, which not only affects the decorative effect, but also may cause personal injury. Large deviations in size will affect the quality of construction and installation and reduce the engineering grade.
The qualified rate of new wall materials is 84%
The results of the third batch of national quality supervision spot checks published in 2010 by the General Administration of Quality Supervision, Inspection and Quarantine showed that the pass rate of new wall materials is 84%.
A total of 119 new walls produced by 119 enterprises in 15 provinces and municipalities including Beijing, Tianjin, Liaoning, Jilin, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Henan, Hubei, Hunan, Hainan, and Guizhou were inspected Material products. A random inspection found that 19 products did not meet the requirements of the relevant standards. The unqualified items involved strength level, antifreeze performance, thermal conductivity, and radionuclide.
7 kinds of aluminum alloy construction profiles are not qualified
The General Administration of Quality Supervision, Inspection and Quarantine made random inspections on 120 kinds of aluminum alloy building profiles produced by 120 enterprises in 11 provinces and municipalities, and 7 products did not meet the requirements of relevant standards. Unqualified items involved wall thickness deviation, sealing quality, Chemical composition (Fe iron, Si silicon) etc.
AQSIQ spot checks some formaldehyde in impregnated paper laminated wood flooring exceeding standard
The State Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China in the third batch of product quality national surveillance spot checks the results of 151 kinds of impregnated paper laminate wood flooring products produced by 151 enterprises in 11 provinces and municipalities directly under the Central Government. 14 kinds of products did not meet the requirements of relevant standards.
8 kinds of locks are unqualified and the mutual opening rate is high
The third batch of national quality inspections conducted by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China for Quality Supervision conducted random inspections on the results of 80 types of lock products produced by 80 enterprises in 4 provinces and municipalities directly under the Central Government. Spot checks found that 8 products did not meet the requirements of the relevant standards, and the problems were mainly concentrated in the items such as "mutual opening rate" and "square tongue axial static load".
A random inspection found that there were 3 batches of products that failed to meet the "inter-opening rate". In addition, some products had unsatisfactory projecting lengths of lock tongues and lock anti-dial safety devices.
For more furniture information , go to http://news.gojiaju.com/
Welcome to provide news interview clues Advertising / News Hotline Transfer 8004 QQ 543178208
Stainless Butterfly Valve,Globe Valve Types,Sluice Valve,Brass Gate Valve
Zhejiang Philic Fluid Control Co.,LTD , https://www.philicflow.com