Nowadays, lamps have been widely used in the dressing of modern families. However, the placement and repair of lamps are usually handled by professional teachers because it is very complicated and dangerous for many friends. The technology live, actually you know? The installation of lamps is not difficult, as long as you have certain skills and follow the correct installation method, it is easy to install it yourself. The following Xiaobian will give you a brief introduction of the lighting installation techniques . I hope to provide you with some help.
Lamp installation skills
1, lighting first install switch
When installing the lamp, if it is able to install the sub-control switch, it can give up many annoying things for the later use, because if there is only one master switch, several lights with the same closed, you can not choose the light and dark, but also A large amount of energy is wasted, and assuming that sub-switches are installed, several lights can be selected according to demand.
2, lighting installation location
The location of the installation is also extremely critical. Generally speaking, the incandescent lamp in a straight line should be placed facing the front part of the cabinet so that the light will be emitted to the rear baffle and then reflected on the console to shoot in the entire space. The center, if the floor is high enough, can also install transparent or translucent chandeliers on the ceiling as a light source, not only providing excellent lighting, but also a very good decoration.
3, lighting installation should be strong
The arrangement of the lamp must be firm. After it is safe, it can be pulled by hand to see if it is stable enough. Next, the bottom cover of the lamp should be close to the ceiling and not shaken. In addition, there is a layer of anti-scratch film on the surface of the ceiling lamp. After it is safe, it should be peeled off. You can use a hair dryer to blow the film first, and then you can easily peel it off.
Lighting installation considerations
First, the ceiling lamp installation notes
The power cord end connected to this type of lamp should maintain good contact and be wrapped with black tape to maintain a certain sense of distance. If conditions permit, try not to put the thread under the same metal sheet to avoid the danger of short circuit.
Second, chandelier installation notes
When using this kind of lamp, the house must have enough floor height, no matter in which room, can't hang too short, otherwise it will not be good to obstruct people's normal line of sight. In general, the boom can be adjusted. At a high level, if the house is low, the use of ceiling lamps will make the house brighter and more generous. In addition, we must also pay attention to whether the chassis is firm and safe enough.
Third, spotlight installation precautions
For the placement of such lights, we must pay attention to the right amount, can not be obsessed with the pursuit of the number of lights, otherwise it will create a great light pollution, it is difficult to achieve the desired decorative effect, and the excessive installation of spotlights, but also more likely to cause fire hazards.
Conclusion: The article is about the lighting installation technology which knowledge analysis, I believe many users for the lighting installation skills which have a further understanding, of course, if you have better suggestions and ideas, please feel free to consult Xiao Bian.
Lighting installation
Linear High Bay,Garage Light Linear Highbay,Led Linear Highbay Light,High Lumen Linear High Bay Light
Fuonce-Lighting , https://www.fuoncelighting.com