[ Huaqiang Security Network News ] 
Do you know how to attach a high-altitude seat belt? This article is a small series for everyone to introduce. The aerial work belt is also called a full-size safety belt, which is usually made of orange-red polypropylene belt. The full range of safety belts are protective equipment for high-level workers to prevent falling casualties. It consists of a belt, a rope and a metal fitting. It is called a full-size seat belt.
Use advantage
For high-altitude operations such as electrical installation and maintenance, it is suitable for external electricians, telecommunications workers, wire repairs, etc.
Seat belt advantages: high strength, wear resistance, durability, mildew resistance, acid and alkali resistance, simple and light, safe and applicable.
How to use aerial work safety belts
First step to connect the tie and safety rope
The second step is the chest strap
The third step is the belt
The fourth step is the leg band
Step 5: Wearing the seat belt
Pay attention to before use
1. When using the seat belt every time, check the signage and certificate, check that the nylon has no cracks, whether the seam is secure, whether the metal parts are missing, cracks and rust, and the safety rope should be hung on the connecting ring.
2. Seat belts should be hung low and low, and prevent swinging, collision, avoiding sharp substances, and not touching open flames.
3. Hook the hook and loop of the seat belt firmly on the mooring point during work.
4. When using the seat belt in a low temperature environment, take care to prevent the seat belt from breaking hard.
5. Frequently used safety ropes should be visually inspected. When an abnormality occurs, the new rope should be replaced in time, and the problem of adding a rope sleeve should be noted.
6. The seat belt cannot be knotted to avoid the safety rope from being disconnected from the knot when the impact occurs. The safety hook should be hung on the connecting ring and cannot be hung directly on the safety rope to avoid the safety rope being cut when falling.
7. After two years of use of the seat belt, the sampling shall be carried out according to the quantity purchase. The fence shall be used as the static load test safety rope for impact test. No cracks may continue to be used, and the non-conforming products shall not be used continuously. The rope must be replaced after the safety rope has been replaced. Pay attention to the rope sleeve when replacing the new rope.
8. Seat belts should be stored in a dry, ventilated warehouse. Do not expose to high temperature, open flame, strong acid, strong alkali and sharp hard objects, and do not expose to the sun. Do not use hooked tools when moving, and prevent sun and rain during transportation.
9. The seat belt should be cleaned frequently. It can be gently rubbed in warm water with soapy water, then rinsed with water and then dried.
10. The various components on the seat belt must not be removed arbitrarily. When replacing new parts, you should select qualified accessories.
11. The life of the seat belt is 3-5 years. If the abnormality is found, it should be scrapped in advance. During the use, please pay attention to the inspection and test it once every six months to one year. If the main parts are not damaged, if it is found to be damaged and deteriorated, it should be reflected in time and stopped to ensure safe operation.
The LED tubes emergency kit is making your LED tubes into Emergency Mode, ideal for LED tubes 3-40W Full power emergency output wattage for LED emergency lighting 60-180mins. Automatic lighting up when main power failures. Suitable for LED fitting with external led driver and internal driver. Widely using for parking lot, office, building, warehouse, school, hospital, workshop etc.
Emergency Led Tube,Led Tubes Emergency,Led Tubes Emergency Kit,led tube light with battery
Foshan Nai An Lighting Electric Co.,ltd , https://www.fsnaipsled.com