1, anti-fouling
Floor wax can be applied to the floor every two or three months. Before waxing, the dust should be removed first, then waxed with a clean lint-free soft rag, starting from the edge of the wooden floor, and then rubbing on the surface of the board. After evenly wiping it again, use the original rag (no more wax) from the edge of the original wipe, and wipe it one by one according to the above scheme. The waxed floor surface not only cleans the zebra, but also refreshes it, and it also protects the paint film and delays aging.
When maintaining solid wood flooring, be sure to keep the floor dry and clean. Do not use water or wet with alkaline water or soapy water to avoid damaging the brightness of the paint. If it is dirty or dirty, wipe it with a dry cloth. It is also necessary to have a wax once a month, but wipe the water vapor and stains before waxing.
2, painted
After three or five years of use, the floor can be repainted with the same paint on the original painted floor. In addition to dust removal and descaling before painting, apply a finer water sandpaper, damp warm water, gently polish the surface of the board, grind off the residual oil on it, and grind the small paint particles left in the last paint. After polishing, wipe it with a clean rag and apply paint. The floor after painting will be smoother, cleaner and brighter.
3, heat protection
If you encounter heating leaks and water on the wooden floor, you must wipe it clean in time. Do not expose the sun directly or bake it in an electric oven to avoid excessive drying and cracking of the floor. Solid wood flooring should not be used for a long time. Do not cover it with plastic cloth or newspaper. Because of the long time, the paint film will become sticky and lose its luster. At the same time, do not put hot water pots, hot rice pots and other things directly on the floor surface, so as not to burn the paint film.
4, scrubbing
In daily cleaning, use a vacuum cleaner to clean it, then clean it with a soft cloth dampened with a special detergent or soap. For large area cleaning, it can be done with a sprayer or a rotary cleaner. For natural lacquered solid wood flooring, water is not good for it. Minimize excess moisture when cleaning. Wring the rag when scrubbing. The oil wax solid wood floor should be removed from the black rubber and other stains that cannot be removed with water can be removed with a soft cloth, low concentration alcohol or a little white wine.
[WeChat public number " Jiuzheng floor network " , industry events, corporate hotspots, mastery ( timely, comprehensive, deep, cool evaluation )! Jiuzheng floor network exchange group]
Ningbo Wason Lighting Technology Co.,Ltd , https://www.wasonlights.com