The service life of the bathtub is closely related to the maintenance. The prevention and maintenance methods of different materials are also different. The bathtub can be divided into acrylic bathtub, steel bathtub and cast iron bathtub according to its material. Next, we will introduce the maintenance methods of these bathtubs separately:
1, weekly cleaning
Use a sponge or flannel when cleaning the acrylic bathtub. Do not use coarse cloth or scouring pad. Do not use any cleaning agent containing granular objects. It is best to avoid direct sunlight and high temperature cigarette butts. Use a mild detergent (such as dishwashing detergent), do not use abrasive cleaner. Acrylic bathtubs can also be cleaned with glass water. The cast iron bathtub should be thoroughly rinsed with clean water after each use and wiped dry with a soft cloth. If you encounter stubborn stains, use a small amount of abrasive cleaner to clean. Clean the bottom non-slip surface with a soft nylon brush. Do not scrub with a steel ball, wire brush or abrasive sponge.
The jacuzzi system should be flushed twice a month.
Adjust the nozzle clockwise to the fully closed position to prevent air leaks. Inject warm water into the bathtub to 2 inches above the highest nozzle, or leave the water in the bathtub after use. Add two tablespoons of low foaming powdered dishwashing detergent and a small amount of household bleach to the water. Turn the jacuzzi on for 5 to 10 minutes, then close, drain the water, and then rinse the bathtub surface with water. When the bathtub is in a hot and humid state for a long time, it will also breed a lot of bacteria. Sometimes it is cleaned and the surface looks clean. In fact, there are still many bacteria. It is recommended to wipe the surface of the bathtub with boiling water regularly. Do not use disinfectant water casually, because disinfecting water does not necessarily kill mold and fungi.
2, gentle treatment of surface stains
Gentle treatment of surface stains You can use a waste soft toothbrush to wash the surface with bleaching powder to remove stains and eliminate mold. If you encounter a hard-to-scratch stain, you can also use a half of lemon to rub the salt, or you can use a soft toothbrush to apply a toothpaste with a whitening function. The turpentine is also very good at this time. For scale, the products used for cleaning toilets on weekdays are very useful. If you don't like the pungent taste, you can use lemon and white vinegar as a natural method. Do not use cleaners with fading, especially when the bathroom is colored. For mold and fungal disease-causing bacteria, rinse with bleaching water and peroxygen water and dry immediately.
3, timely repair scars
The bathtub is installed so that it does not move by itself. If you need to move the position, you must contact a professional. Do not hit or hit the surface with a hard object, causing bruises or scratches. If you need to repair the faint or scratched part of the acrylic bathtub, wipe it with a clean rag and mix the colorless automatic grinding solution, then apply a layer of colorless protective wax. Do not wax on the area where you have settled, so as to prevent it from slipping.
4, handle pipeline blockage at any time and disinfect the pipeline on time
The pipeline should be cleaned once or twice a week to remove the taste and to prevent bacterial growth. You can use a product that cleans the sewers and pour it into the sewer. After 5 minutes, it should be cleaned. Be careful not to use it in metal pipes. If the bathtub is blocked, first close the water removal valve, then put a proper amount of tap water in the bathtub; place the rubber suction device (to clear the toilet) on the water removal valve; while opening the water removal valve, suffocate the basin or The overflow hole of the bathtub; then quickly attracting up and down, sucking out the dirt or hair and cleaning it off in time. In the case of a serious blockage, it can be repeated several times until the dredge is clean.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Butt welded pipe fittings are the most widely used pipe fittings. It is made of high-quality steel pipe and is formed by heating or pressing. Carbon steel pipe fittings are divided into carbon steel elbow, carbon steel tee, carbon steel cross, carbon steel reducer (large and small head), carbon steel head (cap) 5 series. The main implementation standards include GB, DIN, ASME, JIS, GOST. The biggest use of carbon steel pipe fittings is to connect pipes, Valves, pumps and other equipment to form a complete piping system.
When using, the pipe fittings are evenly welded with the flange or directly with the pipeline, so that the entire pipeline is integrated and starts to work normally.
Pipe fittings are widely used in water, beverage, beer, food, petrochemical, nuclear power, machinery, medical equipment, fertilizer, shipbuilding, waterproofing and other pipeline systems. It is the most widely used pipe fittings in the piping system and equipment of machinery, petroleum, chemical industry, water conservancy, electric power, shipbuilding, air conditioning and other departments. The tube cap is also the end cap on the pressure vessel, which is a main pressure-bearing component of the pressure vessel. The quality of the cap is directly related to the long-term safe and reliable operation of the pressure vessel.
Types of butt welded fittings:
According to the model can be divided into: ANSI B16.9 ANSI B16.28 JIS B2311SGP DIN 2605, DIN2615 DIN2616 DIN2617
According to the shape, it can be divided into: elbow, tee, cross,
Reducer (large and small head), head (cap)
According to the thickness can be divided into: SCH 10 SCH20 SCH30 STD SCH40 XS SCH80 XXS
According to the process, it can be divided into: stamping, pushing
According to the material can be divided into: carbon steel, stainless steel, alloy steel
1: Put the high-quality steel pipe, the raw materials according to the required size, and put it into the ring-shaped intermediate frequency furnace to heat and push to form or place it on the mold and extrude it by the press.
2: Pass the shaped elbow blank through the special CNC lathe for pipe fittings according to the drawing. Welding groove processing is performed on the two ends of the elbow blank, with a certain angle and a certain edge, and the angle and deviation range are strictly in accordance with the requirements of the drawings.
3: Put the elbow blank after shaping and beveling, and put it into the shot blasting machine for shot blasting on the surface of the pipe to remove the oxide skin on the inner and outer surfaces.
4: The finished pipe fittings are inspected according to the requirements of the drawings for the thickness and radius of curvature and straightness.
5: The pipe fittings that have passed the inspection will be typed on the end face according to the customer's requirements, and the pipe caps will be treated with anti-rust treatment according to the customer's requirements, and then put into wooden boxes or wooden pallets for transportation.
Standard for butt welded pipe fittings: ANSI B16.9 ANSI B16.28 JIS B2311 SGP DIN 2605, DIN2615 DIN2616 DIN2617
Thickness of pipe fittings: SCH 10 SCH20 SCH30 STD SCH40 XS SCH80 XXS
Size of butt welded fittings: 1/2"-48" (DN15-DN1200)
Steel Fitting,Stainless Steel Fittings,Ss Fittings,Stainless Fittings
Inner Mongolia Overseas.Trade co.,LTD , https://www.flangevalvejoint.com