Gas water heaters are one of the mainstream water heaters in our home life. What if the gas water heaters cannot reach the fire? What are the reasons for the failure of gas water heaters ? Next, we came together to understand the reasons why the gas water heater could not reach the fire .
The reason that the gas water heater is not on fire 1, The electromagnetic valve fails
Water heater cannot solve the problem: if only the ignition sound is heard when the ignition is on, there is no magnetic valve “嗒†magnetic absorption sound, it may damage or aging the solenoid valve, and the solenoid valve will be out of control when the ignition starts. Can pull on, play on fire, but then closed and extinguished; may also be gas pressure is too high or too low, the use of cylinder gas water heater will appear cylinder valve pressure is too high or too low to use the water heater can not be on fire It is more likely that the solenoid valve is dirty.
Solenoid valves cannot pass gas, and gas (natural gas, liquefied petroleum gas, and artificial gas) cannot come out and cannot come out, causing no ignition. Before confirming that the solenoid valve is good or bad, check whether the igniter control circuit is normal. If there is a fault, the solenoid valve cannot be controlled to close.
Gas water heater can not cause fire 2, power problems
Solution: Check whether the AC power plug indicator is on. First remove the power supply.
Reasons why the gas water heater cannot be used for fire 3ã€Improper porcelain pin or induction porcelain pin
Solution:
a. It is very difficult to ignite when the ignition needle is deviated or aged, and it can be replaced or placed correctly.
b. Induction aging, can be placed on the sensor polishing (to make the fire regardless of the fire or a small fire can fully burn the sensor needle) can be.
The reason that the gas water heater cannot reach the fire 4. The electric igniter malfunctions
Solution: The pulse igniter and the controller have a fault on one side and the water heater cannot ignite.
The reason that the gas water heater can't get on the fire 5, the valve seal is eroded after the gas has risen
Solution: Replace parts.
Gas fired water heater can not cause fire 6, gas source switch is not open or the intake filter is blocked
Solution: Turn on the air supply and clean the intake filter.
Gas water heater can not beat the fire 7, the smoke pipe can not normally exhaust gas
Solution: a. There is a blockage in the smoke pipe, and the blockage of the smoke pipe is cleaned; b. The smoke pipe is too long and is not installed correctly.
Regarding the reason that the gas water heater could not reach the fire , I introduced it to you. I hope to help you, and I would like to look forward to seeing more information on this site.
Gas Water Heater Renovation Home
Engineered Acacia Wood Floors,Herringbone Floor Customized,Wood Flooring Apartment,European Oak Flooring Engineered
Shaoxing Haohua Timber Industry Co., Ltd. , https://www.woodtopiafloor.com