Generally speaking, during the use of the truck, please pay attention to the following points: 1. Do not overload;
2. Whether the ground conditions are allowed to be used;
3. Load the goods correctly;
4. Wear safety shoes and gloves when handling;
5. Please do a thorough operation check before each use;
6. Assemble the machine with the correct lifting technique;
7. Don't overlook the potential dangers that may exist during operation.
Proper maintenance will extend the life of the manual hydraulic pallet truck, mainly checking oil, removing air and lubricating during maintenance.
Check the oil level every six months. The newly injected oil to the rubber container should be 5mm below the liquid level, and the fork must be at the lowest position when adding oil.
When replacing the seal, air may enter the hydraulic system and place the joystick in the LOWER position;
Then swing the handle a dozen times. Lubricate the movable part with motor oil or oil.
In addition, daily inspections and maintenance are required. Inspection of the handling vehicle can reduce wear as much as possible. Special attention must be paid to the wheel, axle, handle, fork, lift and lowering control.
Whenever work is completed, the fork should be unloaded and lowered to the lowest position. Zhuo Shi trucks will inevitably encounter some faults during use, and understanding the common use faults will greatly improve the efficiency of the use of handling tools http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
* Plate FLANGE (Plate Flange, Flat Flange, Plain Flange)
* SLIP ON FLANGE (SORF SOFF FLANGE)
* WELDING NECK FLANGE (WNRF FLANGE)
* BLANK FLANGE (BLIND FLANGE, BLFF FLANGE, BLRF FLANGE)
* THREADED FLANGE (SCREWED FLANGE)
*BACKING RING FLANGE
French Standard Flanges,Pipe Tube Connections,Plate Flange with Flat Face,Forged Pipe Flanges
Shandong Zhongnuo Heavy Industry Co.,Ltd. , https://www.zhongnuoflanges.com