The color of the sanitary ware facial wash, toilet, bathtub or bidet should be the same, and the grade of the sanitary ware should be coordinated with the color of the bathroom floor tiles and wall tiles.
Mona Lisa Tiles    Deller Head   Panasonic Yuba
1. To be consistent with the outlet
Before selecting the toilet, it is necessary to clarify whether the toilet reserved water outlet is under drainage or horizontal drainage. If it is under drainage, the distance from the center of the outlet to the wall must be measured, and then the toilet with the same distance should be selected. Otherwise, the toilet cannot be installed; if the drainage is horizontal, the height of the outlet to the ground, the toilet outlet and reserved drainage should be ascertained. The mouth height should be the same or slightly higher to ensure smooth drainage.
2. The color and profile are the same
The color of the sanitary ware facial wash, toilet, bathtub or bidet should be the same, and the grade of the sanitary ware should be coordinated with the color of the bathroom floor tiles and wall tiles. Generally, the color of the sanitary ware in the bathroom is similar to or slightly shallower than that of the floor tiles. The three-way faucet of the basin faucet and the bathtub should be selected with the same brand and the same style is more harmonious. The faucet is best to choose a single-handle ceramic core, because the nozzle of the ceramic valve core is more durable than the rubber core and does not leak water.
3. Inspection of water saving function
When choosing a water saving type toilet, there is often a misunderstanding that the smaller the water tank is, the more water is conserved, and the smaller the water tank is, the less the size of the water tank is. In fact, whether or not the toilet water saving does not depend entirely on the size of the water tank. It is mainly due to the design of toilet flushing and drainage systems and water tank accessories. Some toilet tanks are small, but the flushing performance is poor. One flush is not clean. It takes two or three times to flush. Some toilet tanks are not small, but the tank water line is very low, flushing water is very good, the same water-saving. Therefore, whether the toilet water-saving, can not just look at the size of the water tank, can not only listen to dealers, dealers should be requested from the national technical supervision agency's product testing report marked by the amount of toilet flush. The 6 liters of water used in China are water-saving toilets. The 4. 5 litre water-saving toilets produced by Ying Tao are currently the most water-saving domestic ones.
Sanitary building materials knowledge floor tiles bathroom tiles bathroom tiles color bathroom wall tiles bathroom design bathroom floor tiles bathroom leaking tile adhesive
Non-Metallic Ground Hardener
Scope of application:
Non-metallic Ground Hardener
For wear-resistant impact and reduce the dust on the ground, such as: warehouses, docks, factories, parking lots, maintenance workshops, garages, warehouse-style shopping malls until the ground.
Performance characteristics:
1, with a high degree of wear resistance;
2, reduce dust;
3, impact resistance
4, construction is convenient, easy to maintain;
5, rich colors (cement color, green, red, gray, blue, etc.)
Construction Technology:
1, leveling the horizon leveling, the aggregate evenly spread on the leveling layer;
2, two evenly spread wear-resistant aggregate. Mention pulp and trowel
3, saw the concrete in the appropriate position, make expansion joints, and caulk;
4, curing curing the ground.
Technical index:
|
project |
index |
||
|
Non-metallic aggregate type â… |
Metallic aggregate type â…¡ |
||
|
Wear (gear method) |
≤650 |
≤450 |
|
|
Compressive strength |
3d |
≥49.2 |
≥50 |
|
7d |
≥60 |
≥65 |
|
|
28d |
≥80 |
≥90 |
|
|
Flexural strength |
≥11.5 |
≥13.5 |
|
|
hardness |
7.0±0.5 |
8.0±0.5 |
|
|
Oil resistance |
|
Three-year strength of the oil bubble is not reduced, paint <0.3mm (including impermeability) |
|
|
Corrosion resistance |
|
Standard corrosion test of aggregate, 42d natural potential constant positive, the stability value of +50 mm (S.C.E), the maximum value of +120 mv (S.C.E) cement test, 5% NaCI solution immersion, 2 years and 3 months without rust. |
|
|
Skid resistance |
Same as ordinary cement floor |
Same as ordinary cement floor |
|
Non-metallic Ground Hardener
Non-Metallic Ground Hardener,Red Non-Metallic Floor Hardener,Primary Non-Metallic Surface Hardener,Iron Green Non-Metallic Floor Hardener
Jiangmen Kasole Building Materials Co., LTD. , http://www.kasole-paint.com