The 72-square-meter two-bedroom and two-bathroom bought was nearing the end of the renovation. Recently, the masters were already busy installing the lamps. I have always been in love with those colorful crystal lighting. In previous rental houses, the lighting was a slip of incandescent and energy-saving lamps. Now that I have my own home, I can finally buy back all kinds of lighting for many years.
This is the chandelier by favorite drop, large balcony
Treasure doors and windows Dike doors and windows
After turning on the lights
NVC Lighting Simon Lighting
Renovation Diary Doors and Windows Balcony Lighting Lighting Window Paint Switch Decoration Living room Mirror Lights Bedroom Bedroom Lamps Restaurant Ceiling Bedroom Lighting
Taps and dies are tools used to create purpose screw threads, which is called threading. Many are cutting tools; others are forming tools. A tap is used to cut or form the female portion of the mating pair (e.g. a nut). A die is used to cut or form the male portion of the mating pair (e.g. a bolt). The process of cutting or forming threads using a tap is called tapping, whereas the process using a die is called threading.
Using an ordinary tap or die to clean threads generally removes some material, which results in looser, weaker threads. Because of this, machinists generally clean threads with special taps and dies-called chasers-made for that purpose.
Drill And Tap Set,Hand Tap And Die,Cutting Tool Sets,Hand Tap Wrench
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com