When should I change my mask?

1. Masks are contaminated with foreign materials such as blood stains or droplets

2. The user feels greater respiratory resistance;

3, masks are damaged.

Dust filter cotton, in the mask and the user's face close to a good case, when the user feels a great breathing resistance, indicating that the filter cotton has been covered with dust particles, should be replaced.

Antivirus cartridges, when the mask is in close contact with the user's door, should be renewed when the user smells toxic.
The outer layer of the mask often accumulates a lot of dust, bacteria and other dirt in the outside air, while the inner layer blocks the exhaled bacteria and saliva. Therefore, the two surfaces cannot be used interchangeably. Otherwise, the dirt contaminated by the outer layer will stick directly to it. When inhaling the human body, it becomes a source of infection. When the mask is not worn, it should be folded and placed in a clean envelope. It should be folded tightly against the side of the mouth and nose. It should not be stuffed in the pocket or hung on the neck.

If the mask is moistened with exhaled hot gas or saliva, the effect of blocking the bacteria will be greatly reduced. Therefore, it is best to prepare more masks at ordinary times so that they can be used alternately. They should be changed once a day. Washing should be done with boiling water for 5 minutes, and then gently scrub, rinse with water and expose it to the sun. However, there is activated carbon filtration and disposable cleaning.

Grow Light

Grow Lights are a great choice for growers who are dealing with hot HPS lights and want to change to something that's going to run cooler. Although LED Grow Lights do produce heat,the smaller models might not bring up the temperature of your grow space.Even the more powerful models of LED grow lights that produce a lot of heat still have built-in cooling systems to help prevent the heat from beaming directly down onto your plants.



Yields! With a quality Grow light and an average-to-good grow,you can expect yields of about 0.5g/watt. It depends a lot on strain,and pro growers can yield even more,but that's a good rule of thumb.As an example, a 200W LED (200W true power draw, not an "equivalent" wattage) would yield about 100 grams on average, or 3.5 ounces


Features

Upgraded Epistar chips,High Lumen,High penetration.
Zener Diode protection Each LED,one LED Out,other LEDs still work.
High quality material,Listed Certification Wires,Heatproof Tube,Zero-Risk to catch fire.
Efficient Full spectrum Special rations of Blue,Red and White for both blooming &fruiting stages.
Adopting isolated power supply,safe&easy to maintain&long life time.
Aluminum heat-conducting plate+high quality brand fans,efficient heat dissipation.
IR LED involved,it is not as bright as other leds,But promote the yield.

Plug with listed certificate safe to use.

Grow Light

Product Images

Grow Light

Grow Light

Grow Light


PAR Value of our 2000W LED Grow Lights


LED Grow Lights

The Plug you can choose

Grow Light


Applications

Our professional full spectrum grow light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.


Our Ageing Test

Grow Light


Package

Grow Light


Cautions:

1.Do not use the lights in dripping water or anywhere where they will get wet, water and electricity can be a dangerous mixture

2. The working environment for the light is -20~40 degree celsius,45%RH~90%RH.

3. To protect the light, Plz cut off the power when there is a lightning strike.

4. Don`t touch or move when the light working.

Suggestions:

1.Clean the dust inside every 6 months to ensure the good heat dissipation and long life time.

2.Don`t keep too short distance to the plant canopy to avert leaves bleaching.

3. Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hang too high.

4. While taking care of the plants, please spray the leaves and branches 2-3 times everyday, to ensure the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp


Trade Terms

Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)

Sample will be delivered within 7 working days.

Discounts are offered based on order quanlityes.

MOQ:sample order are acceptable

Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.


Philizon is a company that makes it possible to produce fresh vegetables:

Where it is too hot or too cold,

Where there is too much or too little sunlight,

We create in a complete closed indoor environment the optimal conditions to grow.


Warmly welcome to visit our factory at any time and we will pick you up at the airport or hotel as you request.

Greenhouses Led Plant Grow Light,Led Grow Light,Grow Light,Square Led Plant Grow Light

Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlight.com

Posted on