In front of the house where the eaves can be seen, there will be drainage and provocative gutters, which will be provoked on the roof of the building to prevent rainwater from flowing along the outer wall and pollute the wall surface, so that the roof rainwater can be drained in an organized manner. The gutter is divided into the inner gutter and the outer gutter. The inner gutter refers to the gutter within the outer wall, and the outer gutter is the gutter that picks out the outer wall. Then, Xiaobian will take everyone to look at the exciting content of the provocative gutter .
First, the picking board can not apply the quota of the provocative gutter, then how to set the item?
Floor and roof * flat picking * outside pick less than 50CM, into the board calculation, greater than 50CM, set of awning quota, but with a flat edge of the shackle to provoke a fixed amount. There are also Le, if the height of the sloping edge exceeds 250MM, all the slabs along the slab plate are fixed, less than 25CM, and incorporated into the attached component.
Generally, it is a provocative bottom plate. Also, the amount of provocation includes the bottom plate, the side plate and the picking beam on the plate. This is also for the flat pick, and there are other fancy types, such as The arched plate inside the set of plates is fixed.
Connected to the board (including the roof slab, floor slab), the outer wall is the dividing line; the connecting line with the lintel (including other beams) is bounded by the outer edge of the beam. Outside the outer edge of the outer wall or outside the outer edge of the beam is a provocative gutter.
Second, provocation
Avoid pouring rain on the roof when it is discharged down the wall. Divided into organized drainage and unorganized drainage according to the way of rainwater discharge. The provocation of organized drainage forms a gutter, and there is no gutter in the provocation of unorganized drainage.
In addition to provoking other parts of the roof, there are also gutters, such as the junction between the wall of the daughter and the roof, the junction of two different heights, the junction of the high and low cross.
Third, the gutter
The roof drainage is divided into organized drainage and unorganized drainage (free drainage). Organized drainage generally collects rainwater into the gutter and then drains it from the rainwater pipe. The ditch that collects rainwater is called the gutter, and the gutter is divided into gutters. And the outer gutter, the inner gutter refers to the gutter inside the outer wall, generally has a daughter wall; the outer gutter is a gutter that picks out the outer wall, generally no daughter wall. The gutter is mostly made of white iron or asbestos cement.
Fourth, provocation
At the roof of the building, the roof rainwater is prevented from flowing over the wall and the wall surface is polluted, so that the roof rainwater is organized for drainage.
The two are combined to complete organized drainage.
How about, I read the relevant introduction to the provocative gutter above, and I have learned a lot about the provocative gutter. I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.
Holiday Lighting,Holiday Solar String Light,Waterproof Holiday Lighting,Outdoor Christmas Lights
Shenzhen You&My Electronic Technology Co., Ltd , https://www.nbyoumysolarlight.com