1. Shotcreting with shotcreting machine for mines is generally carried out by two people. During the construction process, the two persons must cooperate closely and find problems in time. The sprayer should control the water-cement ratio so as to prevent the ejector from whitish, runny, and surface. Shine is appropriate.
2. When spraying, it is necessary to grasp the jetting angle and jetting distance, and the nozzles strive for vertical rock face. The injection sequence is generally from the bottom up, from the back to the front, fill the pit fill level and then press the regular operation, do a one-time injection in the end.
3. Before the spraying machine starts, it is necessary to remove large pieces of vermiculite and debris from the machine to prevent blocking of the pipe. After the feed material is stopped, it is necessary to wait until all the materials in the material chamber and feed tube are blown off and then shut down, and clean the inside and outside of the machine.
4. When the spraying machine blows air, it is necessary to fix the nozzle to prevent the nozzle from swinging and hurting people. When dealing with blocked pipe, it is not allowed to bring wind or increase wind pressure treatment. To stop the wind, open the air release valve to hit the blocked pipe, then close the air release valve for air supply and power transmission.
5, pay attention to adjust the wind pressure, water pressure, reduce rebound, reduce dust concentration.
6. When spraying concrete in the seepage section of the roadway, measures should be taken to reduce the amount of water, increase the amount of accelerators to be mixed in, and guide the water pipes.
7. Strengthen personal protection and wear dust masks as required to reduce the harm of occupational diseases.
8, when the spray is in the flat lane position, the mine car should be fixed with a temporary stop car, and it is forbidden to mix in the mine car.
Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of Palm Oil Mass Flow Meter, Palm Oil Mass Flowmeter, Palm Oil Coriolis Mass Flow Meter, Palm Oil Coriolis Mass Flowmeter, Palm Oil Flow Meter, ATEX, IECEx & CE approved.
With its high accuracy, wide rangeability and reliable performance, Sealand meter has been applied in many kinds of industries during the last 8 years. Unlike others who only focus on the measurement of liquid at normal pressure & temperature, Sealand has conquered the difficulty in the measurement under severe conditions, such as high pressure, high viscosity, high & low temperature.
Besides, Sealand lab is
1. Controlled completely by automatic system, to minimize personal error.
2. Equipped with 3 METTLER TOLEDO scales with accuracy 0.014%.
3. Device extended uncertainty: 0.05%.
4. Certified by Zhejiang Institute of Metrology which is authorized by ILAC; Sealand meters are also approved by them after test in their lab with ISO/IEC 17025:2005 standard.
Palm Oil Mass Flow Meter, Palm Oil Mass Flowmeter, Palm Oil Coriolis Mass Flow Meter, Palm Oil Coriolis Mass Flowmeter, Palm Oil Flow Meter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com