1. The kitchen is narrow and long. When the light is installed in the middle, the console is in the innermost part, and the backlight is not convenient when cutting vegetables at night.
Remedy: Install a cabinet light under the cabinet. Run the line from the ceiling and under the cabinet, otherwise you can only consider connecting the line.
Prevention: In the early design, it is necessary to fully consider whether the light source is sufficient.
2. When the lights were installed, the placement of the table was not taken into consideration, resulting in the lights not centering on the table.
Remedy: You can consider changing the center of the light source by changing the shape of the table or lamp, such as using a long strip of light or a round dining table.
Precaution: After the designer finishes the floor plan, he needs to find the center point of the table through the actual measurement to avoid this situation.
3. Stay in bed in the big winter and turn off the lights.
Remedy: See if the lamp can be installed with a remote control, or put a lamp on the bedside, do not have to open the main light, and turn off the desk lamp directly when sleeping.
Prevention: In the design of the circuit is set to double control, a switch near the door, a switch beside the bed, convenient and practical, to avoid the pain of lying in bed and turning off the lights.
Entrance decoration restaurant decoration table decoration design switch arrangement bedside cabinet door kitchen cabinet door
Single-point sensor commonly used parallel beam structure, made of aluminum alloy, high precision, wide measurement range, long life, simple structure, good frequency response characteristics, can work in harsh conditions, easy to realize miniaturization, integration and diversification of varieties.
Load Cells,Single Point Load Cells,Platform Load Cells,High Accuracy Load Cell
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcell.com