The installation of the shower room is usually installed together when decorating the house, but the owner of the shower room can also find out, and then you can install it according to your own preferences. For the shower room installation steps, the residents can follow the steps below. Let's take a look at the following small series!
Shower room installation process
First, install the bottom plate of the shower. The first step is to combine the parts of the bottom basin to determine the level of the bottom basin, to ensure that there is no water in the basin, and the tube should be stretched with the distance, and then the bottom of the basin. The floor drain is securely connected.
Second, test, protection: After installation, water test is required to ensure unimpeded water flow. Find and punch: Use a pencil and a level to determine the drilling position of the aluminum against the wall and punch the hole with a hammer drill.
Third, install aluminum: Knock on the rubber in the hole and lock the aluminum bar to the wall with screws.
Fourth, fixed glass: the glass is clamped and locked in the bottom hole of the bottom basin, and then fixed with screws.
Fifth, install the top tube: find the corresponding position drill hole above the fixed glass, install the (straight/oblique) fixed seat and connect the top tube. Secure it to the top of the glass with a bent sleeve.
Sixth, the installation rack: the position of the installation of sanitary ware
Seventh, install the movable door: install the hardware of the movable door, and install the hinge on the reserved hole of the fixed door. After installation, adjust the position of the shaft of the lotus leaf until the door feels the best.
Eighth, do waterproof: install the suction strip or water retaining strip on the side or below the glass as required. Use aluminum mesh to seal the seam between the aluminum and the wall, glass and bottom basin.
Ninth, debugging, fastening: check whether the parts are comfortable and smooth, and find problems in time. After adjusting, tighten the corresponding screws to make the whole shower room firmer.
Tenth, finishing work: the decorative aluminum strip is stuck in the aluminum wall of the wall to ensure that its appearance is neat and generous. Finally, wipe the entire bathroom with a rag.
Shower room considerations
1. In order to ensure the smoothness of the pulley in the whole shower room, you can add lubricant or peanut oil as appropriate.
2. When the pulley of the track shower room is loose or falling off, it is necessary to find the maintenance personnel to adjust the effective load of the movable door to the movable door. Then use the paper towel to moisten the foreign matter in the track with the peanut oil to ensure smooth sliding; avoid the impact of the force. Doors, so as not to cause the movable door to fall off.
3. Do not hit the glass with sharp hard objects, especially the four corners.
4, the water bar of the shower room is to be affixed to the floor tiles when tiling, the reason for this is to have a good water repellency, after the installation is complete, this time is to use the sensation of the entire shower room to wipe clean, 24 Do not use it within an hour. Remember to keep it quiet for a while. After the completion, you must pay attention to cleaning and maintenance in the future, so that you can create a relaxing bathing environment.
What everyone needs to know is to explain how to install the family shower room. In order to ensure the smoothness of the whole shower room pulley, you can add lubricant or peanut oil properly, hoping to help everyone.
LED Bulb
LEDER technology`s LED Bulb can be used for downlights, Pendant Light , table lamps and Floor Lamps , fanlights, and so on (not for use with fully enclosed fixtures). These LED bulbs are also an excellent alternative to incandescent lamps because they can be used in the same fixtures. With an extremely long lifespan of 11,000 hours, you won`t be changing this LED bulb anytime soon.
Additionally, this LED bulb is ROHS compliant, meaning that it is free of mercury and lead and does not overall Height - Top to emit any harmful UV or IR radiation. The LED light bulb is a versatile and energy-efficient lighting solution that's ideal for indoor use.
Features:
• Color changing with over 1600 colors (RGB+CCT)
• Dimming brightness
• Group and control multiple lights with the smart life app
• Energy saving save electricity
• Contracted design
• Color temperature :3000k-6000K
• Adjustable angle: Rotating lens up to 130 degrees that allows for light distribution in the direction that best suits your space.
• Type of protection: IP20
• Warranty:3 - 5 years
With over 1600 color options we guarantee you will be able to the perfect fit for any mood. Additional temperature controls allow for the perfect light with reduced strain on your eyes.
We have rich production experience in lighting. Except LED Bulb, we also offered other product in Indoor Lighting .Such as : LED Downlight , LED Panel Light, Track Light , Linear Light , LED Strip Light , LED Tube Light , LED Bulb , LED Ceiling Light as so on .
Stair Lights,LED Stair Lights,Stair Lights Indoor,Solar Step Lights
LEDER LIGHTING CO.,LTD , https://www.lederlight.com