HC Plastics News: Join TPE technology to make Shenghaoao "soft and hard"
After acquiring the Italian company API in July last year, Shengyu expanded its soft touch polymer products and technologies based on the rigid plastics business, including the innovative thermoplastic elastomer compound (TPE). Product mix and material technology have been further expanded and enhanced. This "soft and hard" change allows Shenghaoao to provide customers with more comprehensive materials.
The cooperation between MEGOLTM and VWGolf6 is the perfect performance of a soft touch material.
盛禧奥 MEGOLTM
The world's first-tier supplier, BOS Group, previously identified the appropriate soft touch material for the foldable cup holder on the VWGolf6 rear seat armrest. The TPE solution is exactly what they are looking for, because the TPE soft touch material can achieve the soft bottom requirement in this application, avoiding the customer's discomfort when touching the hard part when the handrail is lifted.
The soft touch materials in this application must have some special properties, including: strong adhesion to ABS, good scratch resistance, and high surface aesthetics. Of course, the performance of general automotive interior materials, including low VOC, anti-UV, etc., is also available.
However, the TPE materials they found at the time had two major problems:
In order to avoid deformation of components due to harsh molding conditions, the material must have a very wide molding window.
Surface defects such as flow marks and pitting due to adhesion
Shengao has provided them with the answers. The advantages of MEGOLTM HT155SV/PUVRBlack include:
Can provide a more sturdy processing window for manufacturers when producing cup holders
Shorter molding cycle
High surface quality
Provides excellent adhesion between TPE soft bottom and ABS rigid frame
Significantly reduce scrap rate and reduce costs
Compliance with regulations on atomization, odour and VOC
The Shengao MEGOLTM HT155SV/PUVRBlack has won the customer's adoption with its superiority. 
Editor in charge: Ye Dan
Sub-controller of LED applying system. The DMX-S8 receives the pixel data frame sent by the RTP-S1500 Main Controller. According to the address set by itself, the corresponding data in the pixel frame is taken out. After the format is adjusted, the data is sent out from the controlling port at a specific timing sequence to control the LED light to change color. Set up 2 RJ45 network interfaces; When using unshielded Twisted Pair, the distance of transmission from the main controller to the sub-controller and sub-controller to sub-controller is more than 100 meters; Connect to the switch for network to extend the distance of transmission; Single controller can connect up to 16 computer; Automatically identify its position in the system; Set up 8 DMX512 controlling ports with auto-addressing function. The number of single-port controlling pixels is 170 full-color pixels, 512 monochrome pixels, and the type of connector is the pluggable terminal; Each port conduct optical isolation protecting to ensure the stability of the entire controlling system;
Sub-controller,Sub Controller,DMX 512 Sub Controller,Auto-addressing Sub Controller,LED Lighting System Sub Controller
StrongLED Lighting Systems (Suzhou) Co., Ltd. , https://www.strongledcn.com