| Home>Bearing knowledge>The key to loading and unloading bearings |
The key to loading and unloading bearings
Source: China Bearing Network Time: 2018-05-06
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
(2) The size of the force should be smooth and uniform; it should not be impacted; this requires the use of oil pressure or something that can apply a smooth tension or pressure; the real has to use hammering; also through the copper sleeve and other soft Do not use the metal to cushion; the tapping force can be light. The best use of copper rods or copper hammers for hammering.
(3) Prevent the force from being applied through the rolling body; this requires the force applied through the inner ring when the inner ring (shaft ring) is assembled and disassembled; when the outer ring is assembled and removed, the force is applied through the outer ring.
(4) The drag force should continue to the extent it should be; for example, when the bearing is installed, the force should be stopped when the bearing is just loaded to the correct orientation; ensure that the end face of the ferrule (gasket) abuts against the shoulder hole or the shoulder end face of the shaft; Can't be squeezed too tightly;
Recommend to friends comments close window
| Bearing related knowledge |
| Pseudo-inferior bearings bring our hazard deep groove ball bearings - miniature bearings NSK bearing repair method to analyze the bearing damage and countermeasures in the national table comparison test analysis: hub bearing seal layout |
This article links to http://
Please indicate the bearing network http://
Previous:How to balance the axial thrust of the pump? Next: How to correctly install the slewing bearing
Moving Blanket,Furniture Protection Moving Blanket,Non-Woolen Moving Blanket,Waterproof Moving Blanket
Suzhou Surface Protective New Material Technology Co.,Ltd , https://www.surfaceprotective.com