Home>Bearing knowledge>Technical parameters and utility analysis of slewing bearing greaser

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Technical parameters and function analysis of slewing bearing greaser

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Reverse support (slewing bearing) fatliquoring machine suitable for ship hoisting machinery reverse bearing (slewing bearing) | port machinery reverse bearing (slewing bearing) | stack reclaimer reverse bearing (slewing bearing) | mining machinery reverse bearing (slewing bearing)|metallurgical machinery reversing bearing (slewing bearing)|excavation mechanical reversing bearing (slewing bearing), etc. Orthogonal bearing refilling support grease filling machine; controlled by PLC; with touch screen; The amount of filling and the preset amount of grease are added. The speed is fast; the fatliquoring effect is good. It is used for quantitative filling of product reversing bearings, wind turbine bearings and other products.
Primary technical parameters and functions:
1) grease speed, greater than 5L / turn 2) rotation speed, 1~3 rev / min
3) Filling orientation: Because the digging machine is in reverse support and is filled with butter ester 4) The grease coating machine is controlled by PLC; the touch screen shows the related filling content.
5) The equipment has manual and active functions. 6) The grease-removing machine can preset the amount of grease filling; quantitatively control the grease filling.
7) The grease applicator is equipped with an active sound and light alarm device; the grease filling end alarm prompt.
8) The grease applicator can display and control various condition parameters in real time. It can be switched between manual and active two fatliquoring modes; the manual condition is mainly used for equipment debugging and repair.
9) The grease injection system has a flow rate regulating valve; it can control the filling speed of the grease. The oil pipe joint on the grease filling head uses high-pressure universal joints; it can prevent the pipe from being twisted.
10) The tanker has a perfect inquiry function; it can check the amount of the previous filling and the number of fillings; the added data can be submitted to the management department by electronic method; used for production calculation.
11) Grease plus filling machine can adjust the flow coefficient to adjust the accuracy.
12) The device has the function of filling flow adjustment; the conditioning and filling speed can be controlled according to the actual situation. The device has the filling pause function; the filling can be paused during the filling process; press the filling button again to continue the filling; the total filling The amount is unchanged.
13) The fueling bracket (swing arm) should be able to rotate 180 degrees; the horizontal direction can slide. The total length of the hose is 15 meters from the ground; with self-balancing speed elastic function.
14) The operation control panel is a Chinese interface; the operation is simple and convenient.
15) Reverse diameter: steplessly adjustable in the range of 500-3000mm 16) Grease pressure: 200Bar
17) Power supply; 380V/50HZ
18) noise; ≤70dB

---

Recommend to friends comments close window

Bearing related knowledge

Professors pay attention to the handling of SKF bearing when the temperature is too high. INA bearing oscillating and temperature discriminating the common terminology and definition of bearing damage bearing (16) Assembly of slewing bearings

This article links to http://
Please indicate the bearing network http://

Previous:The use occasions and drawing characteristics of Timken O-rings Next:The front and rear code of Swedish SKF bearings (1)

Other Stone Tools

CHANGZHOU ANTALYA TOOL AND MACHINERY CO., LTD. , https://www.atly-tool.com