Blinds are currently used in a wide range of decoration, it can help people block the sun while also protecting the eyes, because it has these many advantages, it was only sought after by the majority of consumers. The following Xiaobian will introduce to you the shutter installation steps and how to install shutters.
1, measure the frame size
In the measurement, it should be noted that its width is measured from left to right to measure the width of its outer frame, and then measure the top, middle and bottom dimensions of the window, so that the outer frame is suitable for the width. If it is to measure its height, then it is measured from the top to the bottom of the window frame height, in general, is also the size of the window left, middle and right, so measured out is the height of the frame.
2, measure the size of the inner frame
Measuring the inner frame size is to measure the width of the inner frame of the window from the left to the right. It is also necessary to pay attention that the minimum width of the upper, middle and lower parts of the window should be reduced by 1 cm. The measured dimensions are more accurate. . As for its height, the height of the inner frame of the window is measured from top to bottom, and its height is the minimum height of the left, middle and right sides of the window. As long as the window depth is determined in accordance with this determination, in order to allow the shutter blades to move freely, it is also necessary to select the installation method according to the different shutters. For example, if it needs 8cm depth for fixed or horizontal installation, then push-pull installation should not only consider the width of the product blade but also its layer number. For example, two-layer push-pulls need to ensure that their blade movement requires 15cm depth, and if it is a single fan, only 10cm depth is needed.
3, shutter installation
If the blinds are installed in a fixed manner, this will cause great inconvenience to the cleaning. In general, the type of fixed installation is not selected. For example, it has good sealing properties like a flat open type, and this is also more suitable for installation of small windows or single and two windows. Relatively speaking, push-pull mode will occupy less space. This installation method is more suitable for general window installation.
4, shutter installation considerations
Here to remind everyone, if all the installation code is the same product in the installation of the same product must be in a straight line before and after, up and down direction will be more appropriate, if there is a curtain box, then we must pay attention to the width of the curtain box section must be greater than 90mm is more appropriate. Also, remember to push the installation code slider in the end when installing, but also pay attention to horizontal and vertical shutters must remember to close up, if the middle of the installation or the final stop, then remember to pull the rope to the right 45 degrees , This will allow the entire curtain to automatically buckle.
Summary: About the shutter installation steps and how to install the shutter related content is introduced to this, the above steps to install shutters, in the installation process, some attention should be paid to the details, so that you can avoid some of the installation process does not happen. I hope that the above introduction will help everyone.
Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysoncool.com