The preparatory work that should be done before the dismantling of Caigang House has always been a focus topic for many people. With the increasing use of these color steel houses in more and more areas, the information about it has attracted more public attention. Here we briefly look at the basic preparations that should be done before the dismantling of Caigang.
Preparation of Caigang House before Demolition
1. It should be known that the main material of the color steel plate movable house is the high-quality foam sandwich plate. The main components used in such plates are polystyrene and a small amount of polyurethane foam. When these components are dismantled, they will cause different levels of pollution to the environment. Therefore, prior to the dismantling of Caigang House, each worker should be reminded to pay special attention to these issues.
2. Prior to the dismantling of Caigang House, the construction technicians should be carefully organized and the assignment of tasks and tasks should be carried out. Do a good job in related safety issues and technical disclosure.
3. Prior to the dismantling of Caigang House, when workers enter the construction site, they must wear a special safety helmet and all the tools, ladders and equipment needed.
4. For the needs of the demolition project of Caigang House, the power supply connected to the site must meet the requirements, and the selected power cord should be used to perform related electrical connection work.
5. It must be known that there will be a lot of garbage and materials when the Caigang House is demolished. At this time, vehicles to be transported should be ready to transport the garbage and materials to designated locations, avoiding the progress of construction demolition and causing more serious obstacles to the environment.
6, for the relevant ground steel pipe scaffolding, should do a good job of safety facilities and protective measures. Ensure the personal safety of staff during the dismantling of Caigang House.
Type of color steel house
1. Lifting activity room:
Features: Once assembled, it can be installed as many times as a whole, and the structural performance is stable. It is an ideal choice for frequent moving and moving. This is the most basic mode of RV.
2. Assembled activity room:
There is no skeleton or a little skeleton on-site welding, and then the envelope structure (color steel composite panel) is fixed to the structure, features: economical and practical, the best number of movements one or two times, the damage rate of the composite board is high, the on-site operation is large, artificial It will cost more and the cost will increase.
3, assembled activity room:
In the field assembly, bolt the light steel standard rods into skeletons, and then insert the envelope into the house formed in the reserved slots of the skeleton.
The color steel plate activity room is a building that is quick and easy to dismantle. Not only is the practicality very strong, but it also has environmental protection and energy saving. Over the past few years, these color steel activity rooms have been favored by merchants in different fields.
The above is a brief introduction for Xiaobian. If you want to know more related information, please continue to pay attention to Qijia Consulting. More exciting consultation, please stay tuned.
Factory color steel sandwich panel partition loft production color steel room installation decoration preparation
Stainless Steel Flange
A flange can also be a plate or ring to form a rim at the end of a pipe when fastened to the pipe. A blind flange is a plate for covering or closing the end of a pipe. A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together.
Although the word flange generally refers to the actual raised rim or lip of a fitting, many flanged plumbing fittings are themselves known as 'flanges':
There are many different flange standards to be found worldwide. To allow easy functionality and interchangeability, these are designed to have standardised dimensions. Common world standards include ASA/ASME (USA), PN/DIN (European), BS10 (British/Australian), and JIS/KS (Japanese/Korean). In the USA, ANSI stopped publishing B16.5 in 1996, and the standard is ASME B16.5
Stainless Steel Round Tube Flange,Forged Stainless Steel Flange,Stainless Steel Welded Flange,Galvanized Stainless Steel Floor Flange
Yixing Steel Pole International Trading Co., Ltd , https://www.yx-steelpole.com