1. Improve productivity and reduce work errors.
2. The production process is reasonably fixed. Feed production from raw materials receiving, batching, mixing, packaging, and finished product storage is a continuous production process. Any process that is not smooth will result in slow or impossible production. Reasonably match and arrange the number of personnel and personnel to ensure that each equipment has the shortest idle time and the highest full load operation rate, so as to achieve the highest production efficiency and the lowest energy consumption.
3. Ensure that the equipment is in good operating condition.
The basic condition for ensuring continuous production is that the equipment can operate continuously. The equipment can operate normally under the condition of no disease, and requires skilled operators to operate correctly; if improperly operated, it will damage the equipment or shorten the service life of the equipment, causing equipment failure during the production process; at the same time, formulating feasible and effective equipment maintenance Maintenance plan, plan prevention and repair, minimize after-the-fact repair, in order to keep the equipment in good working condition, no unplanned repair or failure of equipment, affecting the completion of normal production process and production plan, thereby improving production. effectiveness.
4. Strictly shut down logistics and reduce material loss.
Strictly accept and keep raw materials. When receiving raw materials, in addition to weight verification, the moisture and impurity content of the materials should be strictly controlled. If the raw material has high water content, it is prone to mold and deterioration during storage, which may cause it to be unusable, which will bring direct economic loss through the enterprise; high moisture raw materials will increase the production difficulty of crushing and granulating process, such as blocking screen and system. Problems such as slow temperature rise, resulting in discontinuous production process, low productivity, and increased energy consumption during processing due to the need to disperse large amounts of water. When the moisture content of the raw material is too low, it should be used in combination with high-moisture raw materials to reduce raw materials. cost. When receiving raw materials, it should be screened. If the content of impurities is large, it will increase the cost of raw materials by filtering out more scraps. Therefore, controlling the moisture content of the raw material (should be lower than the moisture content of the finished product) and the amount of impurities is a key link to reduce material consumption. In the process of receiving, it is required to complete the packaging of the raw materials to reduce the loss during the use of transportation. When unloading the vehicle, it is necessary to clean the site to collect the available materials in time. After the raw materials are put into storage, it is necessary to adhere to the first-in, first-out, to avoid the deterioration of the use due to long storage time, loss of water, and loss. During the storage process, especially in the summer, it is necessary to continuously patrol the warehouse and, if necessary, carry out the smashing, keeping the ventilation, waterproof, moisture-proof, mildewproof and anti-mouse between the materials, and minimizing the loss.
Strictly control the production process. When feeding, the residual material of each bag should be within the allowable range. After casting a batch or a variety, the materials thrown on the ground should be cleaned and used in time; when transporting the raw materials, pay attention to the rotten package, and do not throw it as much as possible. If it is, it should be recycled in time. During the production process, the selected waste materials and dust collected by the dust collector shall be selected and recycled in time. The material head, tail, washing machine and unqualified materials of each batch shall be returned to the machine as required in time to avoid Stacking time is long and scrapped. At the same time, the phenomenon of “run, run, drip, and leak†should be prohibited in the production process to reduce losses.
When packaging finished products, you must first grasp the accuracy of the weight of the package. Secondly, after each batch of finished products is packaged, it is necessary to clean the site in time and return to the machine in time to avoid waste caused by cross-contamination and material confusion of different formula costs; maintain ventilation, waterproof, moisture-proof, mildew-proof and rodent-proof, and ensure the safety of the goods. Adhere to the FIFO and avoid hanging bags.
Machine parts and various production consumables must be kept by a person, and the supervisors should be reviewed and approved by the person for regular assessment.
5. When people leave, they must turn off the lights, fans, etc.
6, computer, printers and other office supplies can not be turned on for a long time without use, should turn off the power before going to work every day.
LEDER technology`s PAR56 LED pool light makes your Swimming Pool Colorful. Multiple colors and multiple combination colors. 7 static modes, 5 dynamic modes, 10-speed levels for 5 dynamic modes. You can choose any model you prefer by remote control, this Led pool spotlight made your life more colorful.The superior design allows for uniform light intensity and color while avoiding hot spots and glare.
We adopted high-grade stainless steel and excellent silica gel blue circle as a lamp body of the LED pool light, with an excellent waterproof sealing material, so quality is absolutely guaranteed.We also make sure the light from this RGB LED swimming pool light more uniform and bright. Used for both Fresh or saltwater pool.
Features:
• Excellent design
• Ecological protection
• Light intensity suitable
• Energy saving save electricity
• Color temperature :3000k-6000K
• Adjustable angle: Rotating lens up to 130 degrees that allows for light distribution in the direction that best suits your space.
• Type of protection: IP20 /IP65 (Some models)
• Warranty:3 - 5 years
LED pool light is a new type of energy-saving and Landscape lights, which have been rapidly developed due to their power-saving and long life characteristics. Our LED underwater lights are widely used in lighting, pool-oriented lighting, green landscape lighting and some outdoor Fountain lighting.
We have rich production experience in lighting .Except Indoor Lighting product, we also offered other product in Outdoor Lighting ,such as LED Flood Light , LED street Light , LED Inground Light, LED Spike Light & LED Bollard Light as so on .
Pool Light, LED Pool Light, LED Swimming Pool Light,PAR56 LED Pool Light
JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.walllightindoor.com