Bathroom waterproof
1. Waterproofing works on the wall and floor with waterproof material to avoid water seepage along the walls or walls and floors, and on the wall, floor paint, splint ceilings and wooden furniture caused by corrosion and deterioration after moisture.
2. In the whole set of home decoration construction, the waterproof treatment between Wei Jian is the key place, because of the large amount of water consumption between Wei Jian, and it is not easy to handle the leakage of water.
3. The ground forms of the bathroom are: caisson type, flat type, table type.
4. Toilet caisson type waterproof treatment:
a. In the caisson, the water supply and drainage pipes and sewage pipes are pre-buried.
b. Clean the debris in the caisson, level the grass and the side, scrape a layer of plain water on the wall, after the mud is dry, brush it with the waterproof coating twice at the same time with the wall to block the function of the concrete pores and avoid seepage.
c. In the caisson, three lanes of 12 red bricks shall be built, on which concrete concrete blocks shall be set aside, and cement mortar shall be used to level and seal the caisson. Note that the caisson shall not have remaining water.
d. The interface between wall waterproofing and caisson waterproofing should be handled well to form a whole.
The bathroom floor is treated with water-repellent treatment. Firstly, the water supply and drainage pipes, drainage pipes, and the entire surface of the ground are grounded. After a layer of plain grout is to be dried on the floor, the waterproof coating of the wall and floor is painted twice. The wall can also be used as a wall. The surface is waterproof, when the wall tiles are set, the lowest row is reserved, and the floor should be waterproofed later. However, the interface must be handled well. The upper and lower intersections should have 200mm and double waterproof.
5. The bathroom floor surface waterproofing treatment of toilets shall be preceded by water supply and drainage, sewage pipelines, and cleanup of the entire level of the wall surface.
After scraping a layer of plain grout to be dried, waterproof should be done at the bottom of the rocker, and then waterproof at the concrete platform. The waterproofing of the wall surface should be extended to the bottom of the rocker platform. The interface should be well handled and the entire brush should be waterproofed twice.
6. Wall waterproof height is generally 900 --- 1000mm, special circumstances to achieve the bottom of the ceiling, such as the back of the wall to the top of the wardrobe, the waterproof layer must be top.
7. In the wall and plaster, the proportion of mortar mixed with waterproof powder, waterproof agent, can also play the role of primary waterproof.
Kitchen waterproof
1. Waterproofing of the kitchen is also important, because the kitchen is equipped with cabinets and cabinets. It is necessary not only to pay attention to the waterproofness in the kitchen but also to prevent water from leaking outwards.
2. Waterproof construction in the kitchen, first pre-embedded water supply and drainage pipelines, clean up the entire wall surface base layer, scrape a layer of plain cement slurry to be dry, the wall surface brush two times waterproof material once completed, but also can first do wall waterproof, the interface must Handling, cross-over should be 200mm, double waterproof.
3. Under the smooth drainage, the perimeter of the drainage pipe hole is closed tightly to avoid seepage.
Kitchen Decoration Toilet Decoration Hydroelectric Renovation Cement Coating Home Decorating Decoration Decoration Red Brick Partition Cabinet Kitchen Door Bathroom Waterproof Toilet Tile Toilet Waterproof Material Whole Bathroom Decoration Home Kitchen Tile Decoration Home
The in vitro culture of cells and tissues has become an indispensable part of life research and practice. A wide variety of cell types are cultured, from viruses to bacteria and fungi, from human cells to animal and plant cells. Some cells and tissues can be grown in suspension, but a considerable number of mammalian cells require surface attachment. Therefore, in addition to good transparency, non-toxicity and sterility, the culture flasks, Culture Plates and culture dishes used to provide the in vitro culture environment of cells also need to be surface-modified to enable them to adhere, divide and grow.
75 cm cell culture flask,t75 cell culture flask,suspension cell culture flask
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yongyuecultureflask.com