KCB-83.3 gear pump structural features: This series gear pump mainly gear, shaft, body, safety valve, shaft seal composed of the end. Gear pump heat treatment has a higher hardness and strength, together with the shaft installed in the exchangeable sleeve operation. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. Gear pump has a well-designed drainage and oil return groove, the gear in the work to withstand the torque of the smallest, so the bearing load, wear small, high pump efficiency. Pump with safety valve as overload protection, safety valve full back pressure of 1.5 times the pump rated exclusion pressure, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline. From the spindle extension to the pump to see, clockwise rotation. KCB-83.3 Gear Pump Uses: Suitable for conveying solid particles and fibers, non-corrosive, the temperature is not higher than 80 ℃, the viscosity is 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) Lubricating oils or other liquids of a similar nature as lubricating oils. KCB-83.3 gear pump applications in the oil transmission system can be used as transmission, booster pump; in the fuel system can be used as transmission, pressure, jet fuel pump; in all areas of industry, can be used for lubricating oil pump .
S.S Braided Hose,Water Tap Hose,Flexible Braided Hose,Stainless Steel Braid Hose
kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucets.com