The northern radiator can be said to be installed in every household, home radiators have a good heat dissipation effect, high work efficiency, can continuously stabilize the indoor temperature, and are loved and supported by many families. However, the installation of home radiators is timely and complicated. Then, the next small series for everyone to introduce home radiator installation location and home radiator that kind of good.
Home radiator installation position
1, should not be high
To know that the higher the installation of the home radiator, the faster the heat will be emitted, because the air is hot air rising cold, so when installing it should try to choose to install under the window, because the radiator close to the ground, can make indoor air Onset of convection, adherence to equilibrium at room temperature, and the ability to heat the air that has been drilled through the window seams serve to prevent cold.
2, does not affect the use of
When installing a home radiator, care must be taken not to affect the placement of the furniture, and it is possible to isolate the cold air from entering the human body.
Home radiator kind of good
1, steel radiator
The steel radiators are mainly made of steel and have the advantages of high pressure resistance, high strength, simple installation, rapid heat dissipation, beautiful appearance, many styles, and many colors. The use of full water maintenance can extend the service life. However, steel radiators are easily oxidized and corroded, and have relatively high water quality requirements. They are not suitable for heating geothermal water. Non-heating season requires full water maintenance, centralized heating supply, and the water flowing through the radiators needs to be deaerated.
2, aluminum radiator
Aluminum radiator features small size, light weight, strong heat dissipation, good energy-saving effect, in the same room, with the same size of radiator, aluminum radiator than the steel radiator used in a small number of tablets . The oxidation resistance of aluminum is good without adding any additives. Aluminum heat sinks have a strong resistance to oxygen, but are afraid of alkali corrosion. However, the Alkali Water Supply Alkaline Conference has an impact on the aluminum radiator and must be internally preserved.
Home Radiator Installation Notes
1, in the installation of home radiators, we must first determine the location of the radiator, so that the installation of heating can achieve the best heating effect, beautiful and safe.
2. When the radiator is installed, safety is the most important. There must be no water leakage. Also, considering the difficulty of construction, it is best not to change the position of the heating riser. If this is done, workers must go to the neighbors to construct the radiator. , may cause inconvenience to others and construction.
3. After the radiators are installed, they must be tested. Workers will leave valves on the pipeline. After the installation is completed, a stamping test will be carried out to prove that no run, place for dripping, dripping or leaking can be completed.
Editor's summary: The introduction of home radiators and home radiators is a good introduction, and we hope to help everyone. If you want to know more about yourself, you can follow the information on this site.
Radiator Top Ten Radiator Home Radiator
Cnc Punching,Cnc Parts,Wholesale Aluminum Parts,High Quality Aluminum Cnc Machining
JIANGSU TONGDE INTERNATIONAL TRADE CO.LTD. , https://www.jstongdetrade.com