The ceiling refers to the decoration of the top of the living environment of the house, that is, the decoration of the ceiling, which is one of the important parts of the home decoration. However, the installation of the ceiling requires attention, and the height of the house is critical. If the floor height is very low, even less than 2.5 meters, then it is not suitable for large-scale ceilings, but it can be suspended in a small area. Consumers are prone to misunderstanding when installing ceilings. Jiuzheng Building Materials Network introduces the misunderstanding of ceiling installation to let everyone go out of the ceiling.
Part1: Install high-quality ceilings first to avoid misunderstanding
Material selection is the first step in home decoration. Many people can hardly see the test report of ceiling materials. Therefore, they can only choose the ceiling by their own eyes. Therefore, consumers have to do their own hands to pick good materials. Misunderstanding.
Myth 1: Don't let the price blind your eyes
The ceiling has a metal ceiling and a plaster ceiling. The general living room uses a plaster ceiling, while the bathroom kitchen uses a metal ceiling. Although it is the same kind of ceiling, the price is different. Some people think that the ceiling is only a small part of the decoration, buy cheap materials; some people value the expensive materials, think that the more expensive the better. These blind pursuits of price purchases can lead to wrong selection.
Jiuzheng building materials network support: For metal ceilings, the quality of the sheet is not the same as the surface quality of the aluminum, the price difference is relatively large. The best gusset plate is imported LG laminated board, no color difference, no discoloration for 30 years. The worst is the spray plate, which is easy to smoke, toxic and discolored. Therefore, consumers should pay attention to seeing the material while paying attention to the price.
Myth 2: Metal ceilings are environmentally friendly
Do not think that only the material that will release formaldehyde will have environmental problems. Many people think that the metal is more environmentally friendly and has little harm to the human body. In fact, this is also a common misunderstanding when the ceiling is purchased.
Jiuzheng Building Materials Network : High-quality metal plates are relatively environmentally friendly, but inferior metal plates contain heavy metals and have radiation to the human body. Moreover, the high iron content is easy to rust, the inferior film is easy to breed bacteria, and the LG film is clean and antibacterial.
Myth 3: only care about sheet thickness
When choosing a metal ceiling, consumers want to pick good quality materials. Some people blindly think that the thicker the board, the better the quality. This is one of the common misunderstandings of ceiling plate purchase. The thickness of the plate does not represent the quality. On the contrary, the plate with too thick will affect the appearance and durability of the ceiling.
Jiuzheng Building Materials Network : The key to judging the quality of the board is the material, the purity of the aluminum, the high-quality aluminum plate is light and the elasticity is good. Inferior aluminum buckle plate with high iron and heavy metal content, heavy and easy to break. So, the thicker it is, the better. Household ceilings are generally used in thicknesses of 0.55 mm, 0.6 mm, and 0.7 mm.
Myth 4: The bigger the plate, the better.
Some homeowners believe that when buying a plate, picking a larger one, so that the amount is small, can save a lot of overhead, but the result of the installation is not good, failed to make the effect that the ceiling should have.
Jiuzheng Building Materials Network : The ceiling plate is not the bigger the better, as long as it meets the national standard, the width of the aluminum plate on the market is generally between 10-15 cm. According to the actual situation of the space, it is the savvy consumer to choose the right size plate.
Part2: Do not pursue the taste to prevent construction misunderstanding
The installation of high-quality ceilings is not only high-quality materials, but also construction is the key. We must not let the construction misunderstandings make our ceilings abandon. Therefore, the construction misunderstanding can not be underestimated, let us know the four construction misunderstandings of the ceiling installation.
Myth 1: Too much personality
Some people install a ceiling, they will design uneven shape, think that the uneven shape will highlight the owner's personality, or use glass, mirror and other materials, which will bring difficulties to the usual cleaning, making the ceiling become a dirt It pollutes the indoor air environment. This is especially true in the northern regions where wind and sand are large and dusty.
Jiuzheng Building Materials Network : It is recommended that consumers install their own ceilings according to the actual situation of the home. The ceiling of the living room and bedroom should be designed and decorated with simple lines. It is recommended to use the ordinary aluminum buckle ceiling for the bathroom and kitchen. The glass and other materials should be used as little as possible to avoid the ceiling becoming a place for dirt and dirt.
Myth 2: There is no need to set up the maintenance hole for the ceiling
The ceiling can make the home space more beautiful, and many consumers ignore the maintenance in the future while pursuing beauty. When the ceiling is installed, the maintenance port is not left to the ceiling, and it is not easy to perform the maintenance of the ceiling and the wire inspection in the future.
Jiuzheng Building Materials Network Tips: Setting up the manhole may be unsightly, but the inspection port can not be lacking, because the ceiling may be covered with wires. After repairing, there is no place to explore. All places are If you are sealed, you have to completely uncover the ceiling, which is not worth the candle. Small ceilings generally retain a 500x600mm service port.
Myth 3: The ceiling installation does not have to be too bothersome
Many consumers believe that the ceiling is only a small part of the decoration, the area is small, do not have to spend too much thinking. In the end, due to the insufficiency of the installation, the ceiling is not strong, which often causes disasters for home safety.
Jiuzheng building materials network support : the ceiling is not strong is the bane, if the ceiling is not installed firmly, there will be a danger of collapse. Therefore, when installing, be sure to install the ceiling keel, sheet metal, etc., and do not plant the bane.
Myth 4: Blindly installing the ceiling
Many consumers think that the decoration of the home is only enough for the ceiling. In fact, because the current commercial housing is not as high as before, it is usually only about 2.6 meters. If such a relatively small space is completely installed with a ceiling, it will visually make people feel nervous and depressed, and then cause some physiological reactions such as dizziness and nausea.
Jiuzheng Building Materials Network : No space is suitable for installing ceilings, and the height of the ceiling needs to be calculated. If the height of the house is only 2.6-2.8 meters, it is best to choose a simple ceiling around the ceiling. It is not suitable to make too much area. Generally, the height of the ceiling is about 2.3-2.6 meters.
Part3: Guarantee the construction of the ceiling and be careful not to accept the error zone
The ceiling project has a wide range, but no matter which type, reasonable design, high-quality materials, and standardized construction technology are important factors to ensure quality and safety. In addition, the acceptance work is also indispensable. The following are the four major misunderstandings of acceptance, and understanding the misunderstandings to avoid entering the acceptance misunderstanding.
Misunderstanding 1: Acceptance does not check cleanliness
Some people may think that the ceiling will not be dusty and do not need to be cleaned, but if the ceiling is shaped like a bump, it is easy to hide.
Jiuzheng building materials network support : the ceiling is easy to hide dust, etc., in the decoration acceptance, the cleanliness of the ceiling also need to be checked. It is generally necessary to check the surface cleanliness of the ceiling, whether there is any debris in the ceiling space, or the waste left by the construction.
Myth 2: The high degree of reflection of the gusset ceiling is good.
When inspecting the ceiling installation, some owners will entangle the surface smoothness of the ceiling plate, which affects the overall aesthetics. I hope that the master will polish it. In fact, this idea is a big mistake when the ceiling is accepted.
Jiuzheng Building Materials Network Support: The surface of the installed ceiling needs no unevenness, it is smooth, and it does not need to be too smooth. The too smooth surface will lead to an increase in spatial reflectivity, which may cause home light pollution.
Myth 3: The flatter the ceiling, the better.
There is usually such a misunderstanding during acceptance, and the ceiling must be installed flat. Therefore, the owners have very strict inspections on the flatness of the ceiling during the acceptance. It is considered that the requirements for the flatness of the ceiling are the same as the requirements for the flatness of the floor wall. In fact, this idea is not correct.
Jiuzheng Building Materials Network : The ceiling is stable, but it is not as flat as possible. It is necessary to consider the problem of the hanging keel in the future. Therefore, when inspecting, the general ceiling center should be 1/200 according to the short side to meet the standard.
[Follow the WeChat public number " Jiuzheng ceiling kitchen grid "; pay attention to courtesy, scan code to send millions of business opportunities! 】
Flexible Hose,Faucet Hose,Bathroom Metal Hose,Braided Plumbing Hoses
kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucets.com