How to check the floor? I believe that many owners are concerned about this issue, because the floor represents the facade of home improvement, if the decoration is not good, it is easy to affect the entire home improvement is not to say, but also seriously affect daily life, so the floor acceptance is critical, but how to check it? Xiao Bian gave you today a few details that you should pay attention to during the floor process!
First, whether the floor color deviation is serious
The demanding uniformity of the natural color difference of solid wood flooring is unrealistic. The solid wood floor must have a color difference, and the color difference is naturally present. Inevitably, this is determined by the nature of the property, so it is normal to say that there is a slight color difference at the time of installation. In order to avoid the chromatic aberration of the wooden floor, affecting the overall appearance of the living room, we will test the pavement during paving, and gradually transition during the paving process to pave the color close to the floor, and the rest can be paved. Under the bed, wardrobe and sofa can reduce the visual difference.
Second, there is no treatment on the edge of the stairs
For the problem of stairs, be sure to do a good job in the design and budget before the renovation, because the decoration of the stairs has a great impact on daily life, for the side of the stair handrail, you can choose to tile it so that it can prevent moisture and moisture. However, if the stairs are paved wooden ladders, the same wooden material can be used on the side of the handrails, so that the appearance is uniform.
Third, empty drum floor tiles
Please pay attention to the following matters when constructing such problems. Base surface treatment to remove oil, dust and loose material from the work surface, clean the gaps in the tiles, and ensure that there is no debris or water. Stir and pour the dry powder into a container containing 27%-29% water, stir it at a low speed with an electric stirrer, and pour the flour to a uniform, thick, thick slurry with no precipitate (paste-like). Allow to stand for 3-5 minutes and stir for 1-2 minutes before use.
Fourth, caulking
Use the caulking tool to press the caulking material completely into the gap in the diagonal direction. Be careful not to leave it empty. After 10 minutes wipe the caulk on the tile surface with a damp sponge or damp cloth. Clean, after the joints are dry, use a wrung wet sponge to clean the tile surface. Within 3 days after the construction, as far as possible, avoid direct sunlight, and it is recommended to sprinkle and repair the construction joint filling material every day for one week.
Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).
Decoration construction knowledge
Clothes Dryer Parts,Copper Pipe Fitting,Clothes Dryer Condenser System,Dryer Condenser Management Device
Suzhou Green New Material Technology Co., Ltd. , https://www.szgreenvip.com