Embossing floor practice process specification
With the progress of the times and the construction of an ecologically harmonious city, the stamped floor has been widely used in every corner of urban roads. So today, Liaoning Plinde has come to answer everyone's questions about the construction process of the stamping floor.
The construction process of the embossing floor must first carry out the bottom layer treatment: it should be finished and compacted and leveled to achieve the specified compaction density. Then pouring concrete in the construction area of ​​the same color and mold type, and use tools to smooth out, need to consider the discharge slope, to avoid accumulation of water. Before the initial setting of the concrete, the concrete shall be leveled with a guillotine knife and the color printing material shall be evenly spread on the concrete surface by two or three evenly distributed amounts according to the prescribed amount. Twilight work. After these are completed, the release agent should be uniformly distributed to the concrete surface layer according to the prescribed amount. The prescribed molds were molded on the concrete surface to be discharged neatly and staked out, and then the stamping work was performed. After completion of the imprinting work, we have to maintain the finished floor, generally at 25°C, after 72 hours, it can be put into use.
The above is the simple construction process of the indentation floor. When the maintenance is still required, care should be taken to apply liquid curing after applying the curing agent for at least one day after cleaning and hardening the surface of the indentation floor. Agent, so that the hardened imprint floor surface anti-pollution non-slip and strengthen again. After the completion of the hardening of the floor, in addition to its good decorative nature, its physical properties are also very stable. The imprint floor maintenance phase must prevent personnel from entering or leaving the site or performing other project construction operations. All of this was done and our imprint floor was perfectly presented to everyone.
304 Stainless Steel Double Pulley Blocks,Marine Pulley Blocks,Yacht Double Pulley Blocks,Stainless Steel Pulley Blocks,Single Pulley Blocks for Sale
Jiangsu Dingtian Stainless Steel Products Co., Ltd. , https://www.dingtiancasting.com