With the improvement of living standards, our requirements for things are getting higher and higher. Now many people choose to install electric rolling shutters in garages. We all know that electric roller shutter doors bring us a lot of convenience. Do you know what the electric roller shutter door remote control pairing method is? Today, Xiaobian will take a look at the electric roller shutter door remote control pairing method and matching precautions!
First, electric roller shutter door remote control pairing method
1, first of all to determine which remote control your remote control, know the crystal frequency model of its remote control, chip model. Note that the chip is not compatible and cannot be copied. (You need to carefully disassemble the remote control to view the model). You can purchase the corresponding model. The specific operation is to press the up and down triangle buttons at the same time.
2. Clear the hands and press the remote control lock button and build down at the same time. At this time, the indicator light will flash continuously, and then release the hands, that is, the clearing is successful. Then how to distinguish the remote control and clear it? Just press a button and the remote control light will turn off, it means that your operation is successful.
3. For the remote control before the take-out, the two remote controls are aligned, and both hands hold the opening buttons of the two remote controls at the same time, and the indicator light will flash quickly to be successful. (Note that the remote control is best to be close, just like the Bluetooth and infrared transmission of the mobile phone, subject to distance limitation), the other three keys can be copied in the same way as above.
Second, the electric roller shutter door remote control pairing matters needing attention
At the time of the acquisition, it must be determined that the chip model is consistent and then the acquisition
1, clear the code. Press the two buttons on the top row of the remote control together, the “open door†button and the “close door†button. After the indicator flashes once, flashing for about 2 seconds indicates that the eradication is successful. After erasing the remote control, the four button indicators will only flash and then subside.
2, copy. One hand holds the original remote control, the other hand holds the universal copy remote control, the two remote controls are as close as possible, and the two remote control "open the door" button is pressed together, and the copying remote control indicator light flashes quickly to indicate that the copy is successful. Then release your hand. In the same way, copy the other three buttons.
Third, the use of electric shutter door remote control
Firstly, the A button on the remote control of the shutter door is locked, and the fingerprint and the key in the door are stopped. Only the lock is closed, the electric door can be operated; the second B button is the operation of closing the door, and the unlocking operation of the A button should be unlocked during the operation; Finally, the C key is the command to open the door.
Electric roller shutters are one of our common safety doors. We still have a certain understanding of how to pair when we are pairing. The above is the editing method and matching precautions for the electric shutter door remote control introduced by Xiaobian today. To finish more information, please continue to pay attention to the decoration home.
Solid Wooden Blades Ceiling Fan Light
Ceiling Fan Bulb Replacement,Ceiling Fan With Daylight Led,Small Bulbs For Ceiling Fans,Small Led Bulbs For Ceiling Fans
JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.jmwindfansummer.com