How to measure shutters, how to measure shutters, and how to measure the size of shutters, requires some professional knowledge for the measurement of the renovated windows. If you think it is necessary, you can ask a professional installer to help you complete the measurement and design work. Then inform the professional installers of the data. What you will get will be high quality products and professional product installation and thoughtful after-sales service. About the measurement of related blinds, the following is a tutorial for you to explain.
Two kinds of window frame measurement difference 
1, window frame built-in measurement method
Width: Measure the high, medium and low width of the inner wall of the window frame respectively. Subtract the fifteenth millimeter from the narrowest width and adjust it to a width of five times the width of the curtain. Special attention should be paid to the measurement of the built-in curtains, which cannot be kept too long or affect the normal activities of the curtains.
Height: Measure the left and right sides and the middle height of the inner wall of the window frame respectively, and use the minimum height as the actual height of the curtain.
2. Method of measuring the outside of the window frame (curtain covering outside the window frame)
Width: The actual width of the window plus one hundred millimeters; Height: The height of the actual window plus one hundred and twenty millimeters. Of course not too high, so as to ensure beauty.
The user should reserve space between the window and the curtain to prevent the window switch from affecting the normal operation of the curtain.
Measurement methods 1, determine the size of the measurement frame size
The width measures the width of the outer frame of the window from left to right. The width of the window is the width of the top, middle and bottom of the window, which is the suitable width of the outer frame.
The height of the window frame is measured from top to bottom, and the maximum size of the left, middle and right windows is the appropriate height of the frame.
2. Measure the inner frame size by the same method of measuring the outer frame size
The window depth is determined to be sufficient to allow free movement of the shutter blades. Different installation methods require different window depths: 8 cm depth is required for fixing or flat mounting; for push-pull installation, the width of the product to be installed is taken into consideration in addition to the width of the blade of the product, generally two layers. Push and pull to ensure that the blade needs 15cm depth, a single fan needs 10cm depth; folding installation needs to reserve 10cm depth.
3, the window is not a regular rectangle
The width or height of each measurement position of the window is within 5mm, which will not affect the production and installation of the shutters. If it is greater than 5mm, the windows shall be made up on both sides of the window to make up for the irregularity of the window. The shutters shall be installed on the wooden side; Can choose to install outside the way, that is, according to the widest, highest hole frame size to do a wooden frame, fixed to the outside of the cavern wall, the blinds fixed on the wooden frame. If the window is made of cement, slate, or other structures that are difficult to fix the louver, the lining wood and the wall need to be fixed, and then the product is installed on the lining wood.
Shutter installation If the fixing method is fixed, blind windows will be inconvenient to clean, and generally, fixed installation is not selected.
The flat-opening method has good sealing properties and is suitable for the installation of small windows or single and two windows.
The push-pull method occupies less space and is suitable for the installation of general windows.
The folding mode is suitable for the opening mode of a plurality of windows, which is generally adopted when a partition or a floor-to-ceiling window is used.
Decoration Precautions Decoration Experience Window Space Glass Decoration Cement Decoration Partition Shutters
Nails for concrete are called cement nails. Cement Nail, commonly known as Steel Nail, is a nail, using carbon steel production, material has 45 steel or 60 steel, after wire drawing, annealing, nail, quenching and other processes processed, so the texture is relatively hard. Its function is to nail in some of the harder other nails can not nail on the object, because the material and ordinary nails are very different, is a special nail. The Cement Nail`s hardness is very big, is thick but short, pierces the Chisel ability to be very strong. CATEGORIES: Cement Nails Poles have a sliding rod, ruled, twill, spiral, bamboo, and so on, the general is a straight or sliding pole. According to different classification, cement nails can also be divided into: Black Cement nails, blue cement nails, color cement nails, countersunk head cement nails, K cement nails, t cement nails, galvanized cement nails and so on.
Home Concrete Wall nails nails several ways: 1, with cement nails, as the name implies is designed specifically in the concrete wall or brick wall and other hard medium nail things. 2. However, cement nails are sometimes not so good, if some walls really can not nail cement nails, expansion Bolts or expansion bolts, no matter how hard the wall it can handle. 3. However, when using expansion bolts or expansion bolts, an auxiliary tool is needed, which is the electric drill.
4. The head of the drill corresponds to the type of expansion bolt, so be sure to have a drill.
Straight, twill, spiral, bamboo
Nantong Safe Yawl Import &Export Co.,Ltd , https://www.ntsyspring.com