Doors and windows are an important part of the living room, and it can well ensure the air circulation of the living environment. However, different types of houses, different installation of windows and doors, and their selection will be poor. However, most people nowadays choose to break through the aluminum window, so how do we maintain the broken aluminum windows ? What are the types of broken aluminum windows ? Let's take a look at Xiao Bian.
1, broken bridge aluminum window maintenance law
First of all, the glass, frame and other parts of the broken aluminum windows can be wiped with a soft cloth dipped in clean water or a neutral detergent to ensure that the glass, frame and other parts are not scratched. However, do not use ordinary soap and washing powder and other strong acid and alkali cleaning agents, will corrode the surface of the profile.
Second, when cleaning broken aluminum windows, do not step on the aluminum frame, and do not pull on the frame as a support. This will easily wear out the windows and even cause danger to yourself. Window or accident itself.
Once again, every two to three months should be buried in the trenches and slide rails of the coping windows to prevent dust, sand, etc. from affecting the normal use of hardware. It is recommended to use soft-bristled brushes for care. In addition, check the hardware of the windows every 3 months to see if the hardware is loose and whether the parts are damaged. If similar problems occur, replace the damaged parts in time.
Then, if the window rusts due to oxidation, use a knife to gently scrape the aluminum rust, then wash it with soapy water, and dry it with a dry cloth; or give a layer of wax oil, it will be more smooth as new. At the same time, lubricating oil can be used every six months to lubricate the rotating, sliding and locking points of the hardware to ensure smooth and flexible use and to extend its service life.
Finally, in normal use, the movement of doors and windows should be light, and the push-pull should be smooth and smooth. If it is difficult to push and pull, do not pull it hard and push it hard. Troubleshoot first, and then deal with it accordingly.
2. What are the classification of windows?
a. According to the opening method, it is divided into: fixed window, upper hanging window, middle hanging window, lower hanging window, vertical turning window, flat open door and window, pulley flat open window, pulley window, flat open lower hanging door and window, sliding door and window, pushing and pulling flat Open windows, folding doors, floor spring doors, lift sliding doors, push-pull folding doors, and inner sliding doors.
b, divided by performance: ordinary doors and windows, soundproof doors and windows, insulation doors and windows.
c. Classified by series model: 50 series, 55 series, 60 series, etc.
d, according to the application site is divided into: inner doors and windows, outside doors and windows.
Xiao Bian concludes: The above is the classification of the aluminum window maintenance rules and windows of the classification of what are the introduction, is not it further increase the knowledge, the original window has so many types, really do not know do not know. But it's not too late to know it now. Collect it quickly and you will certainly be able to use it.
Hydraulic box girder, where the main beam includes a beam in the shape of a hollow box. The box girder usually includes any prestressed concrete, structural steel, or composite material, and reinforced concrete. The box is usually rectangular or trapezoidal in cross section. Box girder bridges are usually used for modern elevated structure transportation of highway overpasses and light rails. Although box girder bridges are usually a form of girder bridge, box girder can also be used in cable-stayed bridges and other forms.
Hydraulic Box Girder,Highway Formwork,Hydraulic Mould System,Hydraulic Box Girder Formwork
Anshan Lijian Engineering Group Co. LTD , https://www.lijianformwork.com