First, the system comparison: real stone paint is more mature and stable than water-in-water
As a stone-like paint, real stone paint has a series of advantages such as high simulation degree, strong stone texture, strong decoration, safe use and long service life. It has become the first choice for dry hanging stone in exterior wall and has been well received by many domestic famous materials. The recognition of the first-line developers.
Although the real stone paint has only received industry attention in the past two years, the development history has been around for 30 years. The predecessor of real stone paint is sandblasting in the 1980s. It is made of river sand and glue. The production process and construction process are extremely simple and rough. The finished product has a single color, poor decorativeness; poor water resistance and stain resistance; poor weather resistance, easy cracking, and short service life. After blasting, it is a styrene-acrylic stone paint. Although the quality is better than sand blasting, it still has weather resistance, stain resistance and water resistance. It is easy to crack, white, soft coating and short service life. .
Until the emergence of pure acrylic and silicone-acrylic emulsions, the high-grade natural colored sand was used to replace the river sand, as well as the improvement of the construction process and the improvement of the formula. The quality system of the real stone paint was gradually improved and improved. Whether it is decorative and service life, it is also improved and improved in weather resistance, stain resistance, water resistance, color retention and workability. In particular, the entire quality (primer, main material, topcoat) system has become mature and stable. The product range of the entire industry has also been greatly enriched, single color, colorful, rock fragments, imitation bricks and so on.
The reason why many people regard real stone paint as a new product is mainly to understand the development of real stone paint. The development of real stone paint has actually gone through 30 years of evolution and improvement process, and the whole system is very mature. There are more successful large-scale cases in the market for more than 8 years. Water-in-water colorful stone coatings, due to the realistic imitation stone effect and good environmental protection, have recently received attention from the industry, but there is still a certain gap between the maturity and stability of the whole system. Especially the storage stability, easy to stratify, deteriorate, and cause the coating to be blurred; the actual application time of water-in-water is only 2-3 years, the actual successful application of large-area application is very few, and the coating cracks appear on the market. The case of peeling is more common. The main reason is that the whole system is immature and unstable, and the coating is too thin.
At present, the domestic water-in-water system is mature and stable, and most of the manufacturers are still in the experimental and model stage. Those who are familiar with the paint must remember that the fluorocarbon paint was very popular when it was first launched. It is known as the “king of paint†and claims to have a service life of 20-30 years. The actual service life is only 1-5 years. Few customers have used fluorocarbon. At that time, the situation of fluorocarbon paint was very similar to the current water-in-water. It is also rumored that “the service life of water-in-water is as long as 10-15 yearsâ€. In fact, cracking occurs after 1-2 years of using water-in-oil. Cases of skin quality problems are not uncommon.
Second, imitation stone hardness and texture: real stone paint imitation stone texture is stronger than water-in-water
Real stone paint and water-in-water colorful paints are used as stone-like paints. On the stone-like texture, real stone paints are significantly higher than water-in-water. On the one hand, the natural colored sand used in the real stone paint and pigment filler, the coating thickness is generally about 3mm, which is very close to the stone in hardness and thickness. The "water-in-water" uses a color paste, and the coating thickness is only about 0.3 mm. The hardness and texture of the stone are not as good as the real stone paint.
Based on the comparison of various indicators, the stability and maturity of the whole system of real stone paint is better than that of water-in-water. In particular, many projects have used real stone paint, the stability of quality has been confirmed, and it is safe and reliable to use. In addition, in the sense of stone material, real stone paint has a natural advantage over “water-in-waterâ€.
In addition, in terms of quality, the effect of ordinary styrene-acrylic stone paint, anti-fouling performance, and low-quality water-in-water; the same ordinary water-in-water (poor product stability) is less than the average real stone paint; high-quality pure C The effect, texture and service life of silicon-acrylic real stone paint are better than water-in-water.
The explanation on the market that “water-in-water is better than the real stone paint†is not entirely correct. The low-end, ordinary real stone paint on the market is not as good as water-in-water, but the anti-fouling performance of high-end real stone paint is not worse than water-in-water. At present, the professional stone paint manufacturers in China have completely solved the problem of anti-pollution of real stone paint through technological innovation. For example, Jiu Nuo's super-stain-resistant real stone paint can effectively prevent invasive pollution, even if the ink is poured on the surface of the coating. Will leave traces of ink.
At this stage, water-in-water is recommended. It is recommended not to use it at the bottom of the building. Because the water-in-water coating is thin, the bottom of the building is easily impacted by external forces. Once subjected to external forces, cracking and peeling may occur. If the bottom is water-in-water, it is recommended to use a real stone paint.
Of course, "water-in-water" as a new type of imitation stone coating, using color paste toning, the simulation degree is better than real stone paint, almost any pattern of stone can be imitation with water. Although in the industry, the water-in-water system does not have the conditions for large-area construction in terms of quality stability, in the field of stone-like coatings, water-in-water will become an emerging mainstream product through technological innovation. Once the quality system is mature and stable, there will inevitably be a broad market space.
Indoor Lighting,Home Ceiling Lighting,Led Flat Tube Batten Light,Indoor Led Linear Light
JIANGMEN MICHEN LIGHTING CO.,LTD , https://www.jmmission.com