Ceiling Engineering substrate (1) metal plate should meet the following requirements:
The materials, types, specifications, colors, and ceiling dimensions of the ceiling metal plates must meet the design requirements and the current national standards.
The connection between the metal plate and the keel must be firm and reliable and must not be loosely deformed.
The location of the equipment mouth and lighting fixtures should be reasonably laid out, and be symmetrical and beautiful according to strips and blocks. Set the cut size to the exact edge neatly without revealing seams. Arrange straight and square.
(2) The installation quality of the metal plate shall meet the following requirements: Quasi-climbing on the board surface; smooth surface; tight joints and interfaces; straight seams on the board, no obvious misalignment, uneven width and width; The shoulder line of the decoration line is correct.
Excellent: the accuracy of surface cracking; smooth surface; tight joints and interfaces; positional arrangement of strip-shaped plates is staggered and orderly, plate joints are straight, misplaced and misaligned; width and width are consistent; yin and yang angles are found in square; decorative shoulders The corners and cutting directions are correct, and the tight and irregular shaped plate discharge positions are reasonable and beautiful.
(3) The surface of the metal plate shall meet the following requirements: the surface shall be clean, there shall be no warping angle, bumps, and the coating shall be in good condition without scratches and no obvious color difference.
Excellent: neat surface, no warping, bumps, good coating without scratches, consistent and beautiful color.
Construction acceptance decoration
Deep well Plate is an ideal product for sample storage, we have many types of 96 Deep Well Plate, such as 0.5ml elution plate, 1.2ml square well V bottom plate, 2.0ml round well U botttom plate for Hamilton and Nunc machines, 2.2ml square well V bottom and 2.2ml square well U bottom. They can be sterilized under high press, and keep the shape for 20 minutes even the temperature arrives at 121℃,All these characteristics set a new standard for the laboratory.
96 Well Deep Well Plate,2ml Deep Well Plate,Deep Well Microplates,1.2 ml Deep Well Plate,Square Well Plate
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyue-pcrtube.com