6" (150mm) Dual Action Air Sander

  • Model NO.: BW-760A
  • Usage: Sanding and Paint Preparation
  • Air Wrench Type: Dual Action Sander
  • Degree of Automation: Semi-automatic
  • Condition: New
  • 0.5 HP Motor for Heavier Material Remove: Built-in Regulator for Positive Control
  • Trademark: Beswell
  • Origin: China
  • Type: Dual Action Sander
  • Working Style: Rotary Type
  • Brand: Beswell
  • Screwdriver Startup Mode: Hand press
  • Customized: Customized
  • Ball Bearing Construction for Durability: Best for: General Sanding and Paint Preparation
  • Specification: CE GS
  • HS Code: 84671100

6
BW-760A  6"Dual Action Air Sander
0.5 HP Motor for heavier material removal
Built-in regulator for positive control
Ball bearing construction for durability
Best for: General sanding and paint preparation
Model FREE SPEED
 RPM		 AVERAGE AIR
CONSUMPTION
( 25% ) SCFM		 PAD Sound dBA
(pressure
/Power)		 EXHAUST LENGTH WEIGHT AIR PRESSURE AIR
 INLET
in. m/m m/m in kgs lbs psi kg/c
BW-760A 10,000 4.5 6 152 89/101 Bottom 227 8.9 1.73 3.8 90 6.3 1/4"

Threaded Rods

1. Correct selection of teeth

1) Before use, confirm whether the mechanical properties of the product meet the customer's requirements (such as the tensile strength of the Bolt and the safe load of the nut).

2) The length of the bolt should be selected properly, with 1-2 pitch exposed after tightening.

3) Before use, the thread should be kept clean.

2. How to use dental strips correctly

1) When tightening the teeth, pay attention to that the direction of force applied by the wrench should coincide with the axis of the screw, and do not tilt.

2) In the process of tightening, the force should not exceed the safety torque, and should be uniform. Try to use the torque wrench or socket.

3) Locking too fast will lead to locking, it is recommended not to use electric or pneumatic wrench.

4) Keep the thread clean. In order to ensure the smooth fit of screw and nut, it is recommended to put the product in a clean container and do not place it at will.

3. Standard of tooth bar maintenance

1) If there is slight damage to the removed tooth, screw and nut, the die and tap shall be used for repair.

2) The removed and repaired teeth, Screws and Nuts shall be maintained by means of oil bubble or lubricating oil, and shall be placed in order according to specifications, models and purposes.

4. Scrap standard

The bolts with obvious crack, broken thread, sliding, disorderly thread, screw tensile deformation, shear trace, etc. which can not be repaired by the on-site leader can be scrapped.

5. Specification parameters of tooth strips

Texture of material:

304/316

Product standard:

DIN975

Surface treatment:

turn into a good guy

Threaded Rods,Full Thread Rod Bolt,Hexagon Socketthread Rod Bolt,Stainless Steel Thread Rod Bolt

Suzhou Gubao Screws Co.,Ltd. , https://www.gbscrewes.com

Posted on